Zimbra Releases/8.8.12/P5

Revision as of 08:11, 6 September 2019 by Ashukla (talk | contribs)

Zimbra Collaboration 8.8.12 Patch 5 GA Release

Check out the Fixed Issues, NG Changelog, and Known Issues for this version of Zimbra Collaboration. Please refer the Patch Installation section for Patch Installation instructions. As always, you are encouraged to tell us what you think in the Forums or open a support ticket to report issues.

NOTE: If you are upgrading or migrating from an older version of Zimbra to Zimbra 8.8 Production Ready, please read Things to Know Before Upgrading and First Steps with the Zimbra NG Modules for critical information before you upgrade.

Software changes

Fixed Issues

  • CSS display attribute is now configurable in OWASP allowing users to have better control over HTML rendering elements.
  • Introduction of OWASP sanitization caused HTML action buttons shown in emails to open the links inside the email preview pane. They now open in a new tab or window.
  • When using ephemeral data storage, every authentication call was updating the lastLoginTimeStamp for every user, ignoring the provisioned zimbraLastLogonTimeStampFrequency setting. In multi-node systems, each update would then sync to all nodes. To reduce the load this issue causes, updates now respect the setting.

NG Changelog

HSM

Added the read_error_threshold option to the doVolumeToVolumeMove operation.

Known Issues

  • After upgrading to 8.8.11 (patch 5+) or 8.8.12 (patch 2+), the Talk module appears unlicensed.

Patch Installation

Before Installing the Patch

Before installing the patch, consider the following:

  • Patches are cumulative.
  • A full backup should be performed before any patch is applied. There is no automated roll-back.
  • Zimlet patches can include removing existing Zimlets and redeploying the patched Zimlet.
  • Only files or Zimlets associated with installed packages will be installed from the patch.
  • Switch to user zimbra before using ZCS CLI commands.
  • Important! You cannot revert to the previous ZCS release after you upgrade to the patch.
  • Important Note for ZCS Setup with Local ZCS repository: Customers who have set up local ZCS repository should first update the local repository by following instructions in wiki

Install the Patch

  • Please make note that, installing the zimbra-patch package only updates the Zimbra core packages.

8.8.12 Patch 5 Packages

Below are the latest available packages:

Package Name                  Version
FOSS:
 zimbra-patch              ->  8.8.12.1566472978.p5-1
 zimbra-chat               ->  2.0.3.1559648872-1
 zimbra-common-core-jar    ->  8.8.12.1566211291-1
 zimbra-common-core-libs   ->  8.8.12.1562659286-1
 zimbra-mbox-war           ->  8.8.12.1562657100-1
 zimbra-mbox-webclient-war ->  8.8.12.1565353367-1
 zimbra-mbox-store-libs    ->  8.8.12.1562659286-1
 zimbra-proxy-components   ->  1.0.3-1zimbra8.7b1
 zimbra-nginx              ->  1.7.1-1zimbra8.7b12
 zimbra-proxy-patch        ->  8.8.12.1554984827.p1-1
 zimbra-drive              ->  1.0.12.1553795496-1 
 zimbra-timezone-data      ->  1.0.1+1565604774-1     
NETWORK:
 zimbra-patch              ->  8.8.12.1566472978.p5-2
 zimbra-mbox-ews-service   ->  8.8.12.1559821948-1
 zimbra-network-modules-ng ->  5.0.6.1565270280-1
 zimbra-docs               ->  3.0.1.1565270236-1
 zimbra-drive-ng           ->  2.0.5.1558693399-1
 zimbra-talk               ->  4.0.2.1554992028-1

Please refer below steps for 8.8.12 Patch 5 installation on Redhat and Ubuntu platforms:

Redhat

Installing zimbra packages with system package upgrades

  • As root, type below command to clear yum cache
yum clean metadata
  • As root, type below command first time so the server sees there is a new zimbra-patch package in the patch repository
yum check-update
  • As root, type below command to update most available packages.
yum update
  • Switch to user zimbra
su - zimbra
  • ZCS must be restarted to changes to take effect. Type below command:
zmcontrol restart

Installing zimbra packages individually

Install/Upgrade zimbra-proxy-components on Proxy node for FOSS and NETWORK
  • As root. Type below command
yum clean metadata
yum check-update
yum install zimbra-proxy-components
  • Restart proxy as zimbra user
su - zimbra
zmproxyctl restart
Install/Upgrade zimbra-proxy-patch on Proxy node for FOSS and NETWORK
  • As root. Type below command
yum install zimbra-proxy-patch
  • Restart proxy as zimbra user
su - zimbra
zmproxyctl restart
zmmemcachedctl restart
Install/Upgrade zimbra-mta-patch on MTA node for FOSS and NETWORK
  • As root. Type below command
yum install zimbra-mta-patch
  • Restart amavisd as zimbra user
su - zimbra
zmamavisdctl restart
Install/Upgrade zimbra-patch on mailstore node for FOSS and NETWORK
  • As root, install the patch. Type below command:
yum install zimbra-patch
  • Switch to user zimbra
su - zimbra
  • ZCS must be restarted to changes to take effect. Type below command:
zmcontrol restart
Install/Upgrade zimbra-chat for FOSS
  • As root, Type below command.
yum install zimbra-chat
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-talk and zimbra-network-modules-ng (NETWORK Only)
  • As root, Type below command.
yum clean metadata
yum check-update
yum install zimbra-network-modules-ng
yum install zimbra-talk
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-docs (NETWORK Only)
  • As root, Type below command.
yum install zimbra-docs
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-drive-ng (NETWORK Only)
  • As root, Type below command.
yum install zimbra-drive-ng
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Upgrade OpenLDAP on LDAP node for FOSS and NETWORK
  • As root. Type below command:
yum install zimbra-ldap-components
  • Restart ldap as zimbra user
su - zimbra
ldap restart

Ubuntu

Installing zimbra packages with system package upgrades

  • As root, type below command first time so the server sees there is a new zimbra-patch package in the patch repository
apt-get update
  • As root, type below command to update most available packages
apt-get upgrade

OR

  • As root, type below command to update all available packages plus any kernel updates.
apt-get dist-upgrade
  • Switch to user zimbra
su - zimbra
  • ZCS must be restarted to changes to take effect. Type below command:
zmcontrol restart

Installing zimbra packages individually

Install/Upgrade zimbra-proxy-components on Proxy node for FOSS and NETWORK
  • As root. Type below command
apt-get install zimbra-proxy-components
  • Restart proxy as zimbra user
su - zimbra
zmproxyctl restart
Install/Upgrade zimbra-proxy-patch on Proxy node for FOSS and NETWORK
  • As root. Type below command
apt-get install zimbra-proxy-patch
  • Restart proxy as zimbra user
su - zimbra
zmproxyctl restart
zmmemcachedctl restart
Ubuntu 18 zimbra-proxy-patch version
zimbra-proxy-patch        ->  8.8.12.1554984827.p3-1

The installation of this patch is mandatory for the proxy to function on Ubuntu 18 servers.

Install/Upgrade zimbra-mta-patch on MTA node for FOSS and NETWORK
  • As root. Type below command
apt-get install zimbra-mta-patch
  • Restart amavisd as zimbra user
su - zimbra
zmamavisdctl restart
Install/Upgrade zimbra-patch on mailstore node for FOSS and NETWORK
  • As root, install the patch. Type below command:
apt-get update
apt-get install zimbra-patch
  • Switch to user zimbra
su - zimbra
  • ZCS must be restarted to changes to take effect. Type below command:
zmcontrol restart
Install/Upgrade zimbra-chat for FOSS
  • As root, Type below command.
apt-get install zimbra-chat
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-talk and zimbra-network-modules-ng (NETWORK Only)
  • As root. Type below command.
apt-get update
apt-get install zimbra-network-modules-ng
apt-get install zimbra-talk
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-docs (NETWORK Only)
  • As root, Type below command.
apt-get install zimbra-docs
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Install/Upgrade zimbra-drive-ng (NETWORK Only)
  • As root, Type below command.
apt-get install zimbra-drive-ng
  • Switch to user zimbra
su - zimbra
  • Zimbra mailbox service must be restarted to changes to take effect. Type below command:
zmmailboxdctl restart
Upgrade OpenLDAP on LDAP node for FOSS and NETWORK
  • As root. Type below command:
apt-get install zimbra-ldap-components
  • Restart ldap as zimbra user
su - zimbra
ldap restart

Quick note: Open Source repo

Downloading and building our Zimbra Code? Keep reading... Starting ZCS 8.7.6 and above we have new steps to download, build and see our code via Github: https://github.com/Zimbra/zm-build



Try Zimbra

Try now Zimbra Collaboration without any cost with the 60-day free Trial.
Get it now »

Want to get involved?

You can contribute in the Community, in the Wiki, in the Code, or developing Zimlets.
Find out more. »

Looking for a Video?

Visit our YouTube Channel to keep posted about Webinars, technology news, Product overviews and more.
Go to the YouTube Channel »

Jump to: navigation, search