Steps to add and remove datasource from GAL account: Difference between revisions
(Created page with "===<h1>Steps to add and remove datasource from GAL account</h1>=== <hr> <br> ===<h2>Problem:</h2> Remove an old or non-working datasource from the GAL account. <h2>Solution:...") |
|||
Line 2: | Line 2: | ||
<hr> | <hr> | ||
<br> | <br> | ||
<h2>Problem:</h2> | |||
Remove an old or non-working datasource from the GAL account. | Remove an old or non-working datasource from the GAL account. |
Revision as of 07:10, 16 August 2017
Steps to add and remove datasource from GAL account
Problem:
Remove an old or non-working datasource from the GAL account.
Solution:
1). Check and find out the exact datasource name which one we want to remove.
Command Syntax :
zmprov getDataSources {GAL-account-name}
Example :
zmprov getDataSources galsync@DOMAIN.COM
2). Now remove the datasource.
Command Syntax :
zmprov deleteDataSource {GAL-account-name} {datasource-name}
Example :
zmprov deleteDataSource galsync@DOMAIN.COM "DataSource-Name"
Additional Information
If we deleted the Internal datasource and want to add it again then we have to use following command.
Command Syntax :
zmgsautil addDataSource -a {GAL-account-name} -n {datasource-name} --domain {domain-name} -t zimbra -f {folder-name} -p {polling-interval}
Example :
zmgsautil addDataSource -a galsync@DOMAIN.COM -n InternalGAL --domain DOMAIN.COM -t zimbra -f _InternalGAL -p 60m
Heera Singh
<hsingh@zimbra.com>