Difference between revisions of "Postfix PCI Compliance in ZCS"

Line 1: Line 1:
{{Article Infobox|{{admin}}|{{ZCS 6.0}}|{{ZCS 7.0}}|}}===Reconfigure the Postfix SSL/TLS settings===
+
{{Article Infobox|{{admin}}|{{ZCS 6.0}}|{{ZCS 7.0}}|}}==Reconfigure the Postfix SSL/TLS settings==
  
1.  Make a backup of /opt/zimbra/postfix/conf/main.cf in case you need to rollback or refer to after an upgrade.
+
===Configuring Postfix for PCI Compliance===
  
2. Log in as root in the command line utility. Switch to the zimbra user account.
+
Reference - http://www.postfix.org/TLS_README.html
 
 
su - zimbra
 
 
 
3. Type the following commands:
 
  
  postconf -e smtpd_tls_ciphers=high
+
====For ZCS 8.5, as the '''zimbra''' user====
  postconf -e smtpd_tls_protocols=SSLv3,TLSv1,\!SSLv2
+
  zmprov mcf zimbraMtaSmtpdTlsCiphers high
  postconf -e smtpd_tls_mandatory_ciphers=high
+
  zmprov mcf zimbraMtaSmtpdTlsProtocols 'SSLv3,TLSv1,\!SSLv2'
  postconf -e smtpd_tls_exclude_ciphers=aNULL,MD5,DES
+
  zmprov mcf zimbraMtaSmtpdTlsMandatoryCiphers high
 +
  zmprov mcf zimbraMtaSmtpdTlsExcludeCiphers 'aNULL,MD5,DES'
  
The SSL/TLS settings are now reconfigured.  The changes will take effect immediately.
+
Within 2 minutes, zmconfigd will update postfix for you, and the system will be PCI compliant.
  
4. To ensure that your changes are not overwritten by a future Zimbra upgrade, you can set them in the local config.
+
====For ZCS 8.0 and previous====
  
 
  zmlocalconfig -e smtpd_tls_ciphers=high
 
  zmlocalconfig -e smtpd_tls_ciphers=high
  zmlocalconfig -e smtpd_tls_protocols=SSLv3,TLSv1,\!SSLv2
+
  postconf -e smtpd_tls_protocols=SSLv3,TLSv1,\!SSLv2
 
  zmlocalconfig -e smtpd_tls_mandatory_ciphers=high
 
  zmlocalconfig -e smtpd_tls_mandatory_ciphers=high
  zmlocalconfig -e smtpd_tls_exclude_ciphers=aNULL,MD5,DES
+
  postconf -e smtpd_tls_exclude_ciphers=aNULL,MD5,DES
 
 
Reference - http://www.postfix.org/TLS_README.html
 
 
 
5.      Use 'zmmtactl restart' to restart postfix.
 
 
 
  
This was originally written for ZCS 5.0.19, and has since been updated and tested in ZCS 6.0.8 and 7.2.0.  Using the Qualys PCI scanning tool as the reference for passing the PCI network scan.
+
The SSL/TLS settings are now reconfigured. The changes will take effect within 2 minutes. Note that '''smtpd_tls_protocols''' and '''smtpd_tls_exclude_ciphers''' will need to be set after every upgrade as there is no way to preserve them in ZCS 8.0 and previous.
  
{{Article Footer|ZCS 6.0.4|11/30/2009}}
+
{{Article Footer|ZCS 7.2.0|11/30/2013}}
  
 
[[Category: SSL/TLS]]
 
[[Category: SSL/TLS]]
[[Category: ZCS 5.0]]
+
[[Category: ZCS 7.0]]
[[Category: ZCS 6.0]]
+
[[Category: ZCS 8.0]]
 +
[[Category: ZCS 8.5]]

Revision as of 23:11, 24 July 2014

Admin Article

Article Information

This article applies to the following ZCS versions.

ZCS 6.0 Article ZCS 6.0 ZCS 7.0 Article ZCS 7.0

Reconfigure the Postfix SSL/TLS settings

Configuring Postfix for PCI Compliance

Reference - http://www.postfix.org/TLS_README.html

For ZCS 8.5, as the zimbra user

zmprov mcf zimbraMtaSmtpdTlsCiphers high
zmprov mcf zimbraMtaSmtpdTlsProtocols 'SSLv3,TLSv1,\!SSLv2'
zmprov mcf zimbraMtaSmtpdTlsMandatoryCiphers high
zmprov mcf zimbraMtaSmtpdTlsExcludeCiphers 'aNULL,MD5,DES'

Within 2 minutes, zmconfigd will update postfix for you, and the system will be PCI compliant.

For ZCS 8.0 and previous

zmlocalconfig -e smtpd_tls_ciphers=high
postconf -e smtpd_tls_protocols=SSLv3,TLSv1,\!SSLv2
zmlocalconfig -e smtpd_tls_mandatory_ciphers=high
postconf -e smtpd_tls_exclude_ciphers=aNULL,MD5,DES

The SSL/TLS settings are now reconfigured. The changes will take effect within 2 minutes. Note that smtpd_tls_protocols and smtpd_tls_exclude_ciphers will need to be set after every upgrade as there is no way to preserve them in ZCS 8.0 and previous.

Verified Against: ZCS 7.2.0 Date Created: 11/30/2013
Article ID: https://wiki.zimbra.com/index.php?title=Postfix_PCI_Compliance_in_ZCS Date Modified: 2014-07-24



Try Zimbra

Try Zimbra Collaboration with a 60-day free trial.
Get it now »

Want to get involved?

You can contribute in the Community, Wiki, Code, or development of Zimlets.
Find out more. »

Looking for a Video?

Visit our YouTube channel to get the latest webinars, technology news, product overviews, and so much more.
Go to the YouTube channel »

Jump to: navigation, search