Performance Tuning Guidelines for Large Deployments
- 1 Hardware and Operating System
- 2 Zimbra MTA
- 3 Zimbra Mailbox Server
- 4 Zimbra OpenLDAP Server
Hardware and Operating System
RAM and CPU
ZCS, like all messaging and collaboration systems, is an IO bound application. Three core components of ZCS (a) the Java based message store (aka mailbox server, tomcat in 4.5.x and jetty 5.0 onwards), (b) MySQL instances used for metadata, and (c) LDAP servers (master and replica) - all rely heavily on caching data in RAM to provide better performance and reduce disk IO. For all large installations we recommend at least 8GB of RAM. Our testing shows that a system with the same CPUs and disk is able to support more users when upgraded from 8GB to 16GB of RAM.
We recommend an x86_64 dual-dual core CPU, of a speed that is not too low or too high on the price/performance ratio. Disable hyper-threading if that feature is present in your CPU (performance monitoring data is unreliable). At this time, we have not tested on dual-quad cores (coming soon).
Almost all recent 'x86' server CPUs support installing a 32-bit/i686 version of Linux or a 64-bit/x86_64 version. We strongly recommend installing the 64-bit version if you have more than 4GB of RAM. If you have 4GB of RAM or less, it is unclear that the 64-bit version will boost performance, but you shouldn't really be running a large install on a system with < 8GB of RAM. If you anticipate adding more RAM in the near future during a maintenance window, do install the 64-bit version now - upgrade from 32-bit to 64-bit is possible, but a lot of work.
A word of caution is in order around 32-bit kernel and 8GB of RAM. In 32-bit mode, the CPU can address only 4GB of RAM even if you paid for 8GB worth of memory sticks, and, by default, a 32-bit Linux kernel only allows each process to address 2GB of space. Through PAE (Process Address Extension), a feature available in some CPUs, and a special 32-bit kernel that supports large address space for processes, it is possible to get a 32-bit mode kernel that really uses > 4GB of RAM, and get a per process 3-4GB address range. Please avoid this hassle. Given there is plenty of RAM, the CPU performs better in 64-bit mode, more CPU registers are available, there is no segment addressing overhead introduced by PAE, and you get a tested platform.
Monitor for swap activity as swapping very adversely affects Zimbra performance. Make sure you have not over-configured memory settings for ZCS components (details in mailbox server section below).
Consider setting swappiness to 0. You can have it take effect immediately with sysctl -w. For a permanent change that takes effect at next reboot, add the following to /etc/sysctl.conf:
Zimbra mailbox servers are read/write intensive, and even with enough RAM/cache, the message store will generate a lot of disk activity. LDAP is read heavy and light on writes, is able to use caches a lot more effectively, and does not generate the type of disk activity that mailbox servers do.
In a mailbox server, the greatest source IO activity is generated by these three sources, in decreasing order of load generated:
- Lucene search index managed by the Java mailbox process
- MySQL instance that runs on each message store server, and stores metadata (folders, tags, flags, etc)
- Blob store managed by the Java mailbox process
MySQL, Lucene and blob stores generate random IO and therefore have to be serviced by a fast disk subsystem. Below are some guidelines around selecting a disk system. Contact pre-sales support for more detailed guidance.
- NO RAID5. RAID5 (and similar parity based RAID schemes) give you capacity, but take away IO performance. Do not believe any streaming file IO peak throughput numbers of RAID5 systems, and expect performance when storing a database.
- NO NFS. It is our experience that the world is full of poor NFS implementations (server and client), and sometimes the disks backing that NFS mount are not performant to boot. Also note that many upstream OSS components of Zimbra (BDB, OpenLDAP, MySQL, Lucene) have or do discourage the use of NFS to store binary/mmaped data.
- NO SATA. SATA drives are great for large capacities and you can even get models with MTBFs that match SCSI and FC drives, but they do not perform as well the 15KRPM or 10KRPM SCSI/FC options. ZCS Network Edition supports Hierarchical Storage Management (HSM) which can be used to store older message blobs on a slightly slower subsystem. You can consider SATA for the HSM destination volume, but make sure that the HSM destination is not so slow that that the HSM processes doesn't complete or takes too long.
- Don't just size for capacity. Eg, 2 x 147 GB drives will perform better than 1 x 300 GB drive.
- Use SANs. Best disk performance today still comes from large SANs with ton of cache (eg, 32 GB).
- Use NVRAM. SANs use some non-volatile RAM to speed up disk writes perform better. In internal disk implementations, some SCSI controllers support a Battery Backup Unit (BBU) to provide this functionality.
- NO Drive Caches. Make sure your disk system/controller disables write caching in the drives. Use of write caches at the drive drives could cause permanent and unrecoverable corruption if contents of these caches are lost in a power failure.
Services to Disable
Linux distributions tend to enable services by default that are not really required in a production ZCS server. We recommend identifying and disabling such services to reduce risk of exposure to vulnerabilities in services that are enabled but not really needed/used, and to avoid any unintended performance interference.
- Use chkconfig --list to get information about services on your system at various boot/run levels.
- Examine the output of ps -ef and make sure there are no processes running that shouldn't be.
The table below lists a few examples of services that may be installed by your Linux distribution that you might consider disabling. Use it as a guide - it is not an exhaustive or prescriptive list. Some services maybe required for the proper functioning of your system, so exercise caution when disabling services.
- autofs, netfs: Services that make remote filesystem available.
- cups: Print services.
- xinetd, vsftpd: UNIX services (eg, telnet) that may not be required.
- nfs, smb, nfslock: Services that export local filesystems to remote hosts.
- portmap, rpcsvcgssd, rpcgssd, rpcidmapd: UNIX RPC services usually used in conjunction with network file systems.
- dovecot, cyrus-imapd, sendmail, exim, postfix, ldap: Duplicates installed by the distro of functionality or packages provided by ZCS.
Disable slocate/updatedb. ZCS stores one message per file, and an updatedb crawl every day at 4am can be expensive.
Services to Enable
Certain services are either required or useful when running ZCS:
- sshd: Secure SHell remote login service is required by ZCS tools. Also used by administrator (ie, people) login to the server. Consider disabling root login and password authentication.</tt>
- syslog: Handles logging of system events. On a multi-node install, designate a single/dedicated server for running syslog server. Logs are auto-rotated and will not fill your hard drive.
- sysstat: System performance monitoring tools for Linux. Includes iostat, which is required by the ZCS zmstats service.
- ntpd: Network Time Protocol server that adjusts for drifts in your system clock.
- xfs: Font server for X Windows. Turning off xfs prevents the virtual X process from starting on the server. Do not run GUI desktops on your server. ZCS needs a virtual X processes for attachment conversions in the Network Edition, but that should be just one process and it is not started through the init/service mechanism.
Please install and be familiar with the use of atleast the following operating system monitoring tools.
- lsof: Show files and network connections in use.
- tcpdump: Sniff network traffic.
- iostat: Monitor IO statistics. -x option is particularly useful.
- vmstat: Monitor CPU/memory use.
- pstack: Get stack trace from a running process (for a Java process a JVM generated thread dump is usually more interesting.)
- strace: Trace systems calls.
Some of these tools are part of the procps and sysstat packages.
The zmstat service shipped since ZCS 4.5.9 requires atleast the IO/CPU/memory monitoring tools to record performance data periodically. It is a good idea to make sure all your servers have the 'zmstats' service enabled.
Open File Descriptors Limit
The mailbox server (specially the Lucene search index) might need to operate on a large number of files at the same time. The Zimbra installer modifies /etc/security/limits.conf to set the maximum number of file descriptors that the 'zimbra' UNIX user is allowed to concurrently open. Until ZCS 5.0.2, the installer used to set this limit to 10,000, and this wiki page used to advice that large installs modify this to 100,000.
As of ZCS 5.0.2, the installer sets the max file descriptor limit to 524,288 (2^19). See bug 23211 for details. Installations upgrading from earlier releases of ZCS should verify that their /etc/security/limits.conf contains the following lines after the upgrade to ZCS 5.0.2:
zimbra soft nofile 524288 zimbra hard nofile 524288
We recommend the ext3 file system for Linux deployments (tried and true, performance for random IO is a wash, gains only in blob store for other file systems).
Mount your filesystems with the noatime option!
We suggest the following options as a guideline for when creating an ext3 filesystem with the mke2fs command. Do consult ext3 documentation. 'Caution: Running mke2Fs will wipe all data from the partition. Make sure that you create the file system in the correct partition. </font>
|-j||Create the file system with an ext3 journal.|
|-L SOME_LABEL||Create a new volume label. Refer to the labels in /etc/fstab|
|-O dir_index||Use hashed b-trees to speed up lookups in large directories.|
|-m 2||Only 2% needs to be reserved for root on large filesystems.|
|-i 10240||For message store, option -i should be the expected average message size. Estimate this conservatively, as no. of inodes can not be changed after creation.|
|-J size=400||Create a large journal.|
|-b 4096||Block size in bytes.|
|-R stride=16||Stride is used to tell the file system about the size of the RAID configuration. Stride * block size should be equal to RAID stripe size. For example 4k blocks, 128k RAID stripes would set stride=32.|
Perform a portscan of your servers from a remote host and localhost (eg, use nmap). Only ports that you need to have open should be open.
The following ports are used by ZCS. If you have any other services running on these ports, turn them off.
|465||SMTP SSL (since ZCS 4.5.5)|
|7110||Backend POP3 (if proxy configured)|
|7143||Backend IMAP (if proxy configured)|
|7993||Backend IMAP SSL (if proxy configured) (not used with nginx since 5.0?)|
|7995||Backend POP3 SSL (if proxy configured) (not used with nginx since 5.0?)|
|10025||Postfix answering amavisd-new|
The Linux kernel makes TCP/IP network tunables available in the /proc/sys/net/ipv4directory. These files can be modified directly or with the sysctl command to make kernel configuration changes on the fly. But changes made this way do not persist across reboots. We recommend editing the file /etc/sysctl.conf and adding the settings below so they will be permanent. If you need your edits to sysctl.conf to take effect right away, use the sysctl -p option.
net.ipv4.tcp_fin_timeout=15 net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1
The above settings allow for ZCS servers to handle a lot of short lived connections. When TCP/IP was designed, networks were lossy and had high latency. With today's modern networks, it is common practice to configure the above options so port numbers are not stuck in TIME_WAIT state. Various RFCs specify how long to wait, and even kernel docs caution you against changing the defaults, but it can pay to be aggressive. Documentation for these settings is in the kernel-doc package, in the file networking/ip-sysctl.txt.
(Sections needs more detail.)
- Add replicas, make sure postfix is using replicas, postfix bangs on LDAP
- Bayes and auto-white-list perf hit (see bug 18192)
- In /opt/zimbra/conf/spamassassin/local.cf.in, set:
- In /opt/zimbra/conf/spamassassin/v310.pre (or similar), add a # to comment out this line:
# loadplugin Mail::SpamAssassin::Plugin::AWL
- In /opt/zimbra/conf/spamassassin/local.cf.in, set (regular multi-node ZCS MTAs doesn't NFS safe locking, see SpamAssassin wiki):
- tmpfs for amavisd-new (see bug 13607)
- Use DNSBLs and whitelist IPs when necessary
- Use mailing list manager (protect your DLs, Zimbra DLs are just an address expansion mechanism)
Zimbra Mailbox Server
Each ZCS mailbox server is a HTTP, IMAP and POP3 server, rolled into one process. The server is highly multi-threaded and uses pool of threads to service incoming connections for these services. An important part of connection handling configuration is sizing these thread pools. Moderns JVMs and kernels are able to support a lot of threads (we have tested as high as 3000), however too many threads can cause memory pressure on the server.
If HTTP, IMAP or POP3 clients get connection refused errors from the server, and if the server appears to be running OK, initiate a thread dump on the Java mailbox server process. You can do this by using either ~zimbra/libexec/zmtomcatmgr threaddump command pre-5.0, or ~zimbra/libexec/zmmailboxdmgr threaddump command in 5.0 or later. The thread dump should show what all the thread pool threads are doing. If they are just idling (usually blocked on a monitor in the thread pool, waiting), this is not a thread pool problem. If all threads are busy doing something else, then either (a) you have hit a bug where the process has wedged itself, or (b) the threads are all busy doing disk IO. Report (a) to us, and for (b) consider better disks or adding RAM for your load or another server.
These thread pool sizes can be configured on a per server basis. However, if you have or will have a multi-node install and all your servers will have a similar configuration, you can set the size in global config, so any new servers you add will get the right defaults for your environment. You can always override the global config setting on any server, by setting the value in the server object. We'll identify any attributes that can be set in both global config or server with a comment below, but show the example as modifying server. Use zmprov modifyServer to modify server attributes, and zmprov modifyConfig to modify global config.
Add note about server restart. Add note about having to apply this on each server. Both these should be higher level comments, probably along with the global config vs server blurb.
In ZCS 5.0, the HTTP stack used by the mailbox server is provided by Jetty (a Java application container). Earlier releases used Apache Tomcat. In both cases, a thread is dedicated to the servicing a HTTP request. Jetty also offers support for idle but long lived HTTP connections without a dedicated thread (see Zimbra blog, link?). Since HTTP connections are not usually long lived, you must size the HTTP thread pool to accomodate concurrent connections at any instant during at the busiest time of the day for the server. You can examine access_log from Jetty or Tomcat to look at your concurrent connections in peak second, and add a 50% padding to that. For most installations, we have found 250 threads each for HTTP and HTTPS to be sufficient.
# ZCS 5.0 has a single thread pool for both HTTP and HTTPS # global config or server OK $ zmprov ms this.server.name zimbraHttpNumThreads 500
# ZCS 4.5.x and earlier had distinct thread pools for HTTP and HTTPS # global config or server OK $ zmprov ms this.server.name zimbraHttpNumThreads 250 $ zmprov ms this.server.name zimbraHttpSSLNumThreads 250
POP3 connections are in general short lived like HTTP connections. The size of the POP3 thread pool should be derived similarly, but the log file to use is audit.log. We have found that a setting of 300 is able to support a few 10s of thousands of users checking mailing every 8 minutes.
# global config or server OK $ zmprov ms this.server.name zimbraPop3NumThreads 300
Most POP3 connections do login, download mail, delete downloaded mail on server, logout. Mailboxes are small and contain the most recent mail. POP3 users who use download but keep on server cause higher load on server for large Inbox folders. Users with large mailboxes seldom use POP3, so this is not a common case..
IMAP thread pool sizing is very different from HTTP/POP3 thread pool sizing. IMAP clients connect and leave the connections open for long periods of time. Some IMAP clients create as many as 4 simultaneous connections to the server. IMAP protocol, by nature, also places a lot of load on servers. Until bug 9470 is resolved, a single thread needs to be dedicated for each IMAP connection at peak time. Too many concurrent IMAP connections can two types of failures - the Java server can get an out of memory error or the disk system will not be able to keep up with the load placed by IMAP. In our tests we have set IMAP thread pool as high as 2500. We recommend closely monitoring your IMAP load and distributing IMAP users across more mailbox servers. See also bug 24096.
# global config or server OK $ zmprov ms this.server.name zimbraImapNumThreads 500
LMTP is the protocol through which mailbox servers receive messages from the Postfix MTA. When possible, Postfix performs multiple LMTP transactions on the same connection. Message delivery is an expensive operation, so a handful of message delivery threads can keep the server busy, unless the message delivery threads become blocked on some resource. While it is tempting to increase the LMTP threads (and the corresponding Postfix LMTP concurrency setting) when MTA queues are behind and latency on message delivery is high, adding more concurrent load is unlikely to speed delivery - you will likely bottleneck your IO subsystem and risk making throughput lower because of contention. If you do experience mail queue backup because LMTP deliveries are slow, then do thread dumps on the mailbox server to see why the LMTP threads are unable to make progress. Another risk of a high LMTP concurrency is that is the event there is a bulk mailing, the server may become unresponsive because it is so busy with message deliveries. The default postfix LMTP concurrency and mailbox server LMTP threads is 20.
# global config or server OK $ zmprov ms <localservername> zimbraLmtpNumThreads 40
# on each MTA server... $ zmlocalconfig -e postfix_lmtp_destination_concurrency_limit=20
You can modify JVM options by making changes in local config. These changes are preserved across upgrades. Your changes take effect when the mailbox service is restarted. Here's an example of adding parallel GC option to the default options. zmlocalconfig -e overwrites existing value, so when changing options you have to specify the whole list.
# ZCS 5.0 and later $ zmlocalconfig -e mailboxd_java_options="-client -XX:NewRatio=2 -XX:MaxPermSize=128m -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -XX:+UseParallelGC"
# ZCS 4.5.x and earlier $ zmlocalconfig -e mailboxd_java_options="-client -XX:NewRatio=2 -XX:MaxPermSize=128m -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -XX:+UseParallelGC"
ZCS install enables the following options by default, and all of these are recommended:
- -client: On 32-bit/i386 systems, there are two JVM code generators, client and server. ZCS uses client JVM on 32-bit systems where it has relatively/historically more robust than server JVM. On 64-bit/x86_64 systems, there is no client JVM, and the option is ignored, and server JVM is always used.
- -XX:NewRatio=2: Sets tenured generation to 2/3 of heap size. A bigger tenured generation triggers fewer major collections.
- -XX:MaxPermSize=128m: Allow more room for loaded classes.
- -Djava.awt.headless=true: When graphics libraries (eg, imaging) are used, use them in a non-windowing mode.
- -XX:SoftRefLRUPolicyMSPerMB=1: By default, the JVM is reluctant to clear softly reachable caches. More aggressive clearing helps servers with a lot of provisioned mailboxes.
You should consider adding enabling the following options which are not on by default:
- -Xss256k: On 64-bit systems the JVM defaults to 1MB of stack space per thread (512K in 32-bit). We have run tests with the default stack size to 128K and we recommend setting the default stack size to 256k, and reducing if necessary.
- -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps: Generate information on garbage collections. As of ZCS 5.0, the zmstat service collects and logs information on GC statistics. But enabling these options in addition to that is useful under certain conditions if GC itself is interfering with zmstat's ability to collect stats. The amount of output generated by these options is not too high. Output goes to ~zimbra/tomcat/logs/catalina.out in ZCS 4.5.x or earlier, and ~zimbra/log/zmmailboxd.out. These files are rotated.
- -XX:+UseParallelGC: If you have more than one processor core, this option would speed up GC.
- -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/some/directory/that/exists/and/is/zimbra/writable: If you hit out of memory errors, this writes a heap dump that you can provide when you report the issue to us. Note that the Java process will terminate itself on out of memory errors and will be restarted by zmmailboxdmgr (5.0) or zmtomcatmgr (4.5.x) nanny process.
- -XX:ErrorFile=/some/directory/that/exists/and/is/zimbra/writable. This option is useful to track if you are encountering any other JVM crashes - these are very rare, but have been useful in the past (too many threads were created and the JVM crashed).
When you set java options and you restart the mailboxservice, if the mailbox Java process does not start up, you should check /var/log/zimbra.log for any errors from the manager process. The manager process filters and allows only a certain subset of JVM options to be used, eg, to prevent changing classpath of the mailbox process (which could let the zimbra shell login gain root privileges).
The mailbox server Java process uses caches extensively. By default, we try to reserve 30% of system memory for use by this process, and 40% for use by MySQL. On systems with > 4GB of memory, you can reserve even more for us by the JVM without risking starving the OS. The memory percent local config variable is converted into the -Xmx option to the JVM at launch time. You should not specify the -Xmx option by setting the java options local config as shown above. Instead, use:
# ZCS 5.0 and later $ zmlocalconfig -e mailboxd_java_heap_memory_percent=40
# ZCS 4.5.x and earlier $ zmlocalconfig -e tomcat_java_heap_memory_percent=40
ZCS stores metadata about the content of mailboxes in a MySQL database. ZCS uses MySQL's innodb storage engine. Innodb caches data from disk, and performs best when load doesn't cause it to constantly evict pages from its cache and read new ones. Every mailbox store server has its own instance of MySQL so ZCS can scale horizontally. Inside each MySQL server instance, there are 100 mailbox groups each with its own database to avoid creating very large tables that store data for all users. 100 was somewhat arbitrary, but works well.
MySQL configuration for the mailbox server is stored in /opt/zimbra/conf/my.cnf which is not rewritten by a config rewriter, but is preserved across upgrades.
Configure the following tunables. All settings below should be in the [mysqld] section.
- Increase the number of connections MySQL will allow to 100. More concurrent connections provide better overall system throughput. Increasing this number higher will not increase throughput because most hardware will be very very busy with that many connections.
max_connections = 105
- Set innodb's cache size. ZCS installer sets this to 40% of RAM in the system. There is a local config variable for mysql memory percent, but today my.cnf doesn't get rewritten after install, so you have to edit my.cnf for this setting if you want to change it. The amount of memory you assign to MySQL and JVM together should not exceed 80% of system memory, and should be lower if you are running other services on the system as well. Here's an example of 40% of a 8GB system:
innodb_buffer_pool_size = 3435973840
- Innodb writes out pages in its cache after a certain percent of pages are dirty. The default is 90%. This default setting will minimize the total number of writes, but it would cause a major bottleneck in system performance when 90% is reached and database becomes unresponsive because the disk system is writing out all those changes in one shot. We recommend you set the dirty flush ratio to 10%, which does cause a lot more net total IO, but will avoids spiky write load.
innodb_max_dirty_pages_pct = 10
- MySQL is configured to store its data in files, and the Linux kernel buffers file IO. The buffering provided by the kernel is not useful to innodb at all because innodb is making its own paging decisions - the kernel gets in the way. Bypass the kernel with:
innodb_flush_method = O_DIRECT
On each of your mailbox servers make sure the local config zimbra_mysql_connector_maxActive is set to 100 to match up with the 105 that you configured mysql to allow.
# Set or set this on all your mailbox server nodes. $ zmlocalconfig -e zimbra_mysql_connector_maxActive=100
Do NOT change innodb_log_file_size. Change this setting is non-trivial, and requires certain procedures to be followed which are documented in the MySQL manual.
ZCS creates and maintains a Lucene search index for every mailbox. As messages arrive, they are added to the Lucene index, and Lucene merges these additions frequently (which results in IO). If multiple additions to a mailbox can be performed together in RAM and flushed at once, write load will be lower. ZCS tries to perform this optimization by keeping open a certain number of mailboxes' index writers (local config zimbra_index_lru_size, default 100), and flushes any open index writers periodically (local config zimbra_index_idle_flush_time, default 10 minutes). Eg, a single mailbox gets two messages in a 10 minute window between flushes, and its index writer was in cache in that time between the two deliveries, then the index update writes to disk less.
However, increasing number of index writers is bad under at least these conditions:
- You do not have sufficient RAM to spare for other purposes (mailbox/message caches, mysql)
- You have a large number of provisioned mailboxes which receive mail
- You frequently send messages to all mailboxes on a single ZCS mailbox node - you blow through index writer cache. Delivering messages to all is one of the peak load times, so you will not have gained any benefit from this optimization in your peak load from this cache.
We have found that setting index writer cache size to more than 500-1000 on 8GB can result in high GC times and/or out of memory errors, depending on your mailbox usage.
If you need to disable the index writer cache entirely (because you are seeing out of memory errors, or you have determined that your message delivery rate is so even across many mailboxes that the cache doesn't reduce IO), do this:
# need to restart mailbox service for this to take effect $ zmlocalconfig -e zimbra_index_max_uncommitted_operations=0
The value of 0 for zimbra_index_max_uncommitted_operations overrides any value in zimbra_index_lru_size, ie, 0 uncommitted ops disables the index writer cache use.
See also bug 24074 (too many recipients should bypass index writer cache) and bug 19235 (batched indexing).
Backup and Recovery
The Network Edition of ZCS includes full backup and restore functionality. When ZCS is installed, a backup schedule is automatically added to the cron table. You can change the schedule, but you should not disable it. Backing up the server on a regular basis can help you restore your mail service if an unexpected crash occurs.
The default full backup is scheduled for 1:00 a.m. every Sunday and the default incremental backups are scheduled for 1:00 a.m. Monday through Saturday. Backups are stored in /opt/zimbra/backup. You will need to make sure that this backup is on a different disk and partition than your data and set up the process to automatically copy the zmbackups offsite or to a different machine or tape backup to minimize the possibility of unrecoverable data loss in the event that the backup disk fails.
Backup and restore is documented in the Administrator’s Guide and more information can be found elsewhere in the Zimbra wiki.
TODO: add a note about auto-grouped backups in 5.0.
Max message size
ZCS 5.0 has much better support for larger messages. In earlier versions large messages caused increased memory pressure and we recommend using the default 10MB max message size. Even with ZCS 5.0 do not increase max message size arbitrarily - large messages do caused increased IO load on the system (by nature), and external mail servers will like not accept large messages.
Message cache size
Mailbox server maintains a message cache to speed up message parts retrieval (Mail.app, especially). Set this cache at least 100MB on large installs:
# can be set on global config or server zmprov ms zimbraMessageCacheSize 104857600
Zimbra OpenLDAP Server
We recommend that you set up one LDAP replica for each MTA.
For best performance, the following settings in the /opt/zimbra/conf/slapd.conf.in file should be modified. These settings apply to both the master LDAP server and the replica servers.
Note: Changes to slapd.conf.in have to be re-applied after an upgrade.
- Add a command to set the threads count to 8. The default is 16. The threads config should be above the pidfile setting.
- Change cachesize. The number set should be the number of configured active accounts and the number of configured active domains. The default is 10000.
# number of entries to keep in memory cachesize 50000
- Set idlcachesize. The number set should be the same as the cachesize setting.
Important: You must restart the LDAP server after you make these changes. cachesize and idlcachesize should be configured in the database section (look for existing values and modify them).
If you have more than 100 domains, we suggest adjusting the following local config setting:
- ldap_cache_domain_maxsize. This sets the cache of the number of domains in the server. The default is 100. If more than 100 domains are configured, you should adjust this to the lower of the number of domains you have configured and 30,000. For example, with 45,000 domains, set as this to 30000.
# Apply this to all mailbox servers! zmlocalconfig -e ldap_cache_domain_maxsize=30000
Configuring the BDB subsystem to increase LDAP server performance
BDB is the underlying high-performance transactional database used to store the LDAP data. Proper configuration of this database is essential to maintaining a performant LDAP service. There are several parameters involved in tuning the underlying BDB database. This always involves editing the DB_CONFIG file. Modifications to the DB_CONFIG file require a restart of the LDAP server before they are picked up, and should be made to both master and replica servers.
You can increase LDAP server performance by adjusting the BDB backend cache size to be at or near the size of your data set. This is subject to the limit of 4 GB for 32 bit and 10 TB for 64 bit, and the amount of RAM you have. The size of the data set is the sum of the Berkeley DataBase (BDB) files in /opt/zimbra/openldap-data. To increase the cache size, add (or replace) the following line to the DB_CONFIG file in /opt/zimbra/openldap-data/. The following would set the database in-memory cachesize to 500MB:
set_cachesize 0 524288000 1
The format for the set_cachesize command is <gigabytes> <bytes> <segments>
On 32 bit systems, when setting cachesize greater than 2 GB, the cachesize must be split across multiple segments, such that no one segment is larger than 2 GB. For example, for 4 GB, to split across multiple segments, you would type.
set_cachesize 4 0 2
It is possible to check that the cache setting has taken effect by using the /opt/zimbra/sleepycat/bin/db_stat -m -h /opt/zimbra/openldap-dataǀhead -n 11 command can be used to see the current cache setting, as well as to find other important information. Example output:
500MB Total cache size 1 Number of caches 500MB Pool individual cache size 0 Requested pages mapped into the process' address space. 3437M Requested pages found in the cache (100%). 526125 Requested pages not found in the cache. 47822 Pages created in the cache. 526125 Pages read into the cache. 27M Pages written from the cache to the backing file. 0 Clean pages forced from the cache. 0 Dirty pages forced from the cache.
The above output shows that there is a 500MB total cache in a single segment all of which is allocated to the cache pool. The other important data to evaluate are the Requested pages found in the cache, the Clean pages forced from the cache and the Dirty pages forced from the cache. For optimal performance, the Requested pages found in the cache should be above 95%, and the pages forced from the cache should be 0.
As part of the transaction interface, BDB uses a number of locks, lockers, and lock objects. The default value for each of these parameters is 1000. How many of each are being used depends on the number of entries and indices in the BDB database. The /opt/zimbra/sleepycat/bin/db_stat -c -h /opt/zimbra/openldap-dataǀhead -n 12 command can be used to determine current usage:
5634 Last allocated locker ID. 2147M Current maximum unused locker ID. 9 Number of lock modes. 3000 Maximum number of locks possible. 1500 Maximum number of lockers possible. 1500 Maximum number of lock objects possible. 93 Number of current locks. 1921 Maximum number of locks at any one time. 483 Number of current lockers. 485 Maximum number of lockers at any one time. 93 Number of current lock objects. 1011 Maximum number of lock objects at any one time.
The above output shows that there are a maximum of 3000 locks, 1500 lockers, and 1500 lock objects available to the BDB database located in /opt/zimbra/openldap-data. Of those settings, there are currently 93 locks in use, 483 lockers in use, and 93 lock objects in use. Over the course of the lifetime of the database, the highest recorded values have been 1921 locks used, 485 lockers used, and 1011 lock objects used. As long as usage is within 85% of the configured value(s), it should not be necessary to modify the settings.
The following entries in DB_CONFIG would increase the number of locks to 3000, the lock objects to 1500, and the lockers to 1500:
set_lk_max_locks 3000 set_lk_max_objects 1500 set_lk_max_lockers 1500