View source for King0770-Notes-Header-Checks

==Section I - General Info==
As a long time fan of Postfix, I use Postfix's header_check feature to discard messages (or redirect) I don't want coming off the wire. In my opinion, using Postfix to discard unwanted messages is a good way to keep spam messages away. However, using header_checks must be used with care. The purpose of this wiki is to guide you to add your own header_checks file for the Zimbra-MTA system.

==Section II - Prepare ZCS Machines==
First, look at the postfix_header_checks in Zimbra's localconfig. 

<code><pre>
zmlocalconfig | grep header_checks

Most likely you will see the following:
postfix_header_checks = pcre:/opt/zimbra/conf/postfix_header_checks
</pre></code>

Now, lets create our own header_checks file. Note: For this wiki, I am going to create a "custom_header_checks" file, but you can create your own file. 
<code><pre>
touch /opt/zimbra/conf/custom_header_checks

zmlocalconfig -e postfix_header_checks="pcre:/opt/zimbra/conf/postfix_header_checks, pcre:/opt/zimbra/conf/custom_header_checks"

zmmtactl restart

zmlocalconfig | grep postfix_header_checks

You should see:
postfix_header_checks = pcre:/opt/zimbra/conf/postfix_header_checks, pcre:/opt/zimbra/conf/custom_header_checks
</pre></code>
Don't forget to use postconf to make sure the changes are picked up. 
<code><pre>postconf | grep header_checks</pre></code>

If the header_checks are not picked up from the postconf command, run the following command. 
<code><pre>
zmprov mcf zimbraMtaBlockedExtensionWarnRecipient FALSE

zmmtactl restart
</pre></code>

==Section III - Editing your custom header checks file==
Editing your /opt/zimbra/conf/custom_header_checks is fairly straight forward, just use your favorite editor, i.e  vi, nano, emacs.

No need to run postmap against the /opt/zimbra/conf/custom_header_checks

==Section IV - Header checks syntax by example==
In the interest of brevity and simplicity, I am only going provide a few examples. Honestly, I've only scratched the surface of this feature. 

<code><pre>
/^Subject:(.*)From U.S. Ambassador to Nigeria/   DISCARD #spam rule no msgs from Nigeria

/^Subject:(.*)\?KOI8-R\?/ DISCARD #spam rule Russian encoding not allowed by this server

/^Subject:.*Bad Word*/ REPLACE Subject: Censored

/^From:(.*)Slice-O-Matic Reviews/   DISCARD #spam rule No slice o-matics

/^From:(.*)Your Free iPad/   DISCARD #spam rule No thank you

/^From:(.*)user005@badspammerdomain.com/   DISCARD #spam Known spammer address

/^From:(.*)Tarot Reading/   DISCARD #spam rule No Tarot reading

/^From:(.*)someaccount@yahoo.com/ REDIRECT ceo@domainexample.com #spam rule redirect all messages from this address

/^From:(.*)<(.*)@yahoo.com>(.*)/    REDIRECT monitor@domainexample.com

/^To:(.*)<(.*)@yahoo.com>(.*)/  REDIRECT monitor@domainexample.com

/^Cc:(.*)everybody@domain.com/ .     DISCARD     # Drop any messages that are CC'd to a specific address

/^To:(.*)somebody@example.com/ BCC manger@domainexample.com     #BCC to the manager

/^Received: from .+\..+\.mydomain\.com .+(by mail\.mydomain\.com .+) / REPLACE Received: $1

/^Received: from mac7\.local/ IGNORE

/^Received: from .*\.local/  IGNORE

/^Received:.*\[192\.168\.0\.[0-9]/      IGNORE

/^Received:.*\[192\.168\.99\.254/      IGNORE      # Hide my internal IP

</pre></code>

==Section V - FAQ's==
<strong>Question: I want to implement header_checks of my own, will Zimbra Support officially support custom header_checks?</strong><br>
Answer: No. However, you are free to add your own header_checks.
<br>

<strong>Question: I noticed Zimbra uses /opt/zimbra/conf/postfix_header_checks.in, can I edit this file?</strong><br>
Answer: I would suggest if you are wanting to use your own header_checks, keep your header_checks files separate; header_checks for Zimbra, and your own custom header_checks file.
<br>

<strong>Question: I noticed you are using "DISCARD" in your examples, why are you not using "REJECT"?</strong><br>
Answer: Because using "DISCARD" means the MTA will delete the message; which is what I want given the regexp syntax. The "REJECT" notation will let senders know that their message was rejected, and the MTA refused to deliver their message.
<br>

<strong>Question: I've added a header_check rule, but it's not working, what do I do?</strong><br>
Answer: Postfix does a good job notating why a specific header_check rule didn't work. Check the /var/log/zimbra.log file. 
<code><pre>
grep warning /var/log/zimbra.log
</pre></code>

<br>

<strong>Question: I noticed in your examples you are using #spam rule, why?</strong><br>
Answer: Easy grepping of the /var/log/zimbra.log file. 
<code><pre>
grep "spam rule" /var/log/zimbra.log
</pre></code>

<br>
<strong>Question: Are there any examples on the Internet?</strong><br>
Answer: Yes. Just search for "header_checks by example"

==Section VI - ZCS 8.5,  8.6,  8.7==
If you are using ZCS-8.5, 8.6, or 8.7, update the <strong>zimbraMtaHeaderChecks</strong> setting,  instead of updating the local config by running zmlocalconfig. 

<code><pre>
zmprov mcf zimbraMtaHeaderChecks 'pcre:/opt/zimbra/conf/postfix_header_checks  pcre:/opt/zimbra/conf/custom_header_checks'

zmmtactl restart

</pre></code>

==Section VII - Body Checks==
By default, Zimbra does not touch the MTA body_checks feature. However, updating the zmconfigd.cf and localconfig should make postfix start using the body_checks setting.  See, https://bugzilla.zimbra.com/show_bug.cgi?id=103124.<br>
If you want to implement the MTA's body_checks feature, you can do the following.<br>
<strong>Note: This is for versions for 8.5, 8.6, & 8.6</strong>

<code><pre>
Add the following to the /opt/zimbra/conf/zmconfigd.cf file (right below delay_warning_time, and above header_checks)

POSTCONF body_checks    LOCAL postfix_body_checks

Then update zimbra's localconfig...

zmlocalconfig -e postfix_body_checks="pcre:/opt/zimbra/conf/custom_body_checks"

touch /opt/zimbra/conf/custom_body_checks

Restart the MTA to pick up the changes. 

zmmtactl stop

zmmtactl start

Then check it...

postconf | grep "^body_checks ="

body_checks = pcre:/opt/zimbra/conf/custom_body_checks  <<== Should see this line
</pre></code>


[[Category:Community Sandbox]]
[[Category:Command Line Interface]]
[[Category:MTA]]