How to disable SSLv3

Revision as of 19:08, 15 October 2014 by Fmarques (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Admin Article

Article Information

This article applies to the following ZCS versions.

ZCS 8.0 Article ZCS 8.0 ZCS 8.5 Article ZCS 8.5

How to disable SSLv3

Due to the recent discovery of a new SSL vulnerability (CVE-2014-3566: Poodle SSLv3), this protocol has been considered unsafe. This is a protocol flaw and Zimbra might include patches or configuration changes in future releases. Please check existing Bug for more information.

As a workaround, this guide will help you on how to disable SSLv3 with Zimbra. This has been tested on both ZCS 8.0.8 and 8.5.0 releases.

Note: disabling SSLv3 might prevent older browsers to connect to Zimbra using SSL as they don't support TLS 1.0.



zmprov mcf zimbraMtaSmtpdTlsProtocols '!SSLv2,!SSLv3'


postconf -e smtpd_tls_protocols=\!SSLv2,\!SSLv3

Run "zmmtactl stop ; zmmtactl start" to force the changes or wait for mailboxd to rewrite Postfix config from LDAP after 2 minutes.

Note that smtpd_tls_protocols will need to be set after every upgrade as there is no way to preserve them in ZCS 8.0 and previous.



For https and Admin UI, please edit /opt/zimbra/conf/nginx/templates/nginx.conf.web.https.default.template and /opt/zimbra/conf/nginx/templates/nginx.conf.web.admin.default.template, including the following line under the server { } configuration:

ssl_protocols TLSv1 TLSv1.1 TLSv1.2;


# HTTPS Proxy Default Configuration
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    ${core.ipboth.enabled}listen                  [::]:${web.https.port} default;


If you are using SSO with Client certificates, also edit /opt/zimbra/conf/nginx/templates/nginx.conf.web.sso.default.template.

For imaps and pop3s, please edit /opt/zimbra/conf/nginx/templates/nginx.conf.mail.pop3s.default.template and /conf/nginx/templates/nginx.conf.mail.imaps.default.template:


# POP3S proxy default configuration
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;


Restart the proxy servers with: "zmproxyctl stop ; zmproxyctl start"

Jetty (mailboxd)


How to verify if the changes have been done? We should run the following command (as zimbra) for every port using SSL:

openssl s_client -connect `zmhostname`:<port> -ssl3 |grep failure

Example, for port 443:

openssl s_client -connect `zmhostname`:443 -ssl3<pre>

If it shows a failure, it's good and we don't support SSLv3:
140532971947680:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1275:SSL alert number 40
140532971947680:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:s3_pkt.c:598:

If you are seeing:

New, TLSv1/SSLv3, Cipher is ECDHE-RSA-AES128-SHA
Server public key is 2048 bit
Secure Renegotiation IS supported

SSLv3 is still enabled and you need to verify the changes.

Here is a command to verify common ports when using the Zimbra proxy (run this at the proxy):

for p in 993 995 443 ; do echo Port $p ; timeout 3 openssl s_client -connect `zmhostname`:$p -ssl3 |grep failure ; done

If you are proxying adminUI, please add port 9071, 7071 or the port you have configured. If you are proxying SSO requests, please add port 3443.

List of ports: 443 - HTTPS 993 - IMAP-SSL 995 - POP3-SSL 9071 - AdminUI SSL

For Postfix, run the following command at the MTA for the SMTP-SSL port (465):

timeout 3 openssl s_client -connect `zmhostname`:465 -ssl3
Jump to: navigation, search