- 1 Perdition use cases
- 2 Setting the ports
- 3 Perdition certificates
- 4 Perdition log levels
- 5 Enabling the service
- 6 Disabling the service
Perdition use cases
Perdition is a proxy for the POP and IMAP protocols that allows a user to connect to any Perdition server, regardless of their account's zimbraMailHost, and use a POP or IMAP client to access their mail.
Perdition is also useful for offloading the SSL connection from the tomcat server, and handling it in the proxy. This can reduce the load on the mailstore server, as well as work around some IMAP SSL bugs.
Perdition can proxy these services:
- IMAP (default port 143)
- IMAPS (default port 993)
- POP3 (default port 110)
- POP3S (default port 995)
Setting the ports
"Real" and proxied ports
In any perdition setup, there are 2 ports defined for every service. The real port is the port that tomcat listens on to handle connections. The proxied port is the port that perdition listens on for client connections. When perdition is configured, the client connects to the proxied port, and perdition connects to the tomcat server on the real port. The real ports can (and probably should) be blocked from access to the outside world by your firewall.
- This is the real port for cleartext POP connections
- This is the real port for SSL POP connections
- This is the proxied port for cleartext POP connections
- This is the proxied port for SSL POP connections
- This is the real port for cleartext IMAP connectionsions
- This is the real port for SSL IMAP connectionsions
- This is the proxied port for cleartext IMAP connectionsions
- This is the proxied port for SSL IMAP connections
When configuring perdition in a multi server environment, all of the servers should have the same ports defined for the real ports, and the same ports for the proxied ports. That is, all servers should have the zimbraImapSSLBindPort defined the same. Failure to do so will prevent perdition from operating correctly.
Additionally, all of the ports should be unique on a server - so none of the ports on a given server should be used for any other service on that server.
Cleartext and encrypted connections
By default, the server will not accept IMAP and POP login over a cleartext (non-encrypted) connection. If cleartext connections to the server are enabled, the perdition proxy will forward SSL connections to the cleartext port on the real server port, offloading the SSL processing from the tomcat server. This is the recommended configuration
Enabling cleartext IMAP/POP connections
To enable cleartext connections on the server server.example.com:
zmprov ms server.example.com zimbraImapCleartextLoginEnabled TRUE zimbraPop3CleartextLoginEnabled TRUE
This requires a tomcat restart.
Perdition log levels
The default ZCS perdition.conf has connection and debug logging enabled. This will send extremely verbose information to the /var/log/zimbra.log. To reduce this, you can disable the debug and connection logging. Look for these lines in the file /opt/zimbra/conf/perdition.conf.in:
Comment those lines out and add a line with "q" for quiet:
#C #d q
Then run "zmperditionctl restart". Verify that the changes have propagated to the /opt/zimbra/conf/perdition.conf; if not, edit that file to make the same changes manually and restart perdition again.
Note: If there were already any imap connections to perdition, they will continue the verbose logging until they are closed.
Enabling the service
Enabling at install time
If you are installing zimbra, perdition can be enabled at install time under the store menu. Enabling it at install time will automatically set the ports correctly and enable the service, and none of the other instructions in this section are needed.
Set the ports
To enable perdition on the host server.example.com with proxied ports 110, 143, 993, and 995 and real ports of 7110, 7143, 7993 and 7995: Set the proxied Ports
zmprov ms server.example.com zimbraPop3ProxyBindPort 110 zimbraImapProxyBindPort 143 zimbraPop3SSLProxyBindPort 995 zimbraImapSSLProxyBindPort 993
Set the real Ports
zmprov ms server.example.com zimbraPop3BindPort 7110 zimbraImapBindPort 7143 zimbraPop3SSLBindPort 7995 zimbraImapSSLBindPort 7993
Enable the proxy service
zmprov ms server.example.com +zimbraServiceEnabled imapproxy
Start the services
tomcat stop; tomcat start
Disabling the service
To disable Perdition, perform the steps to enable in reverse order.
Stop the service
Disable the proxy service
zmprov -- ms server.example.com -zimbraServiceEnabled imapproxy
Unset the proxy ports
zmprov ms server.example.com zimbraPop3ProxyBindPort "" zimbraImapProxyBindPort "" zimbraPop3SSLProxyBindPort "" zimbraImapSSLProxyBindPort ""
Set the real ports
zmprov ms server.example.com zimbraPop3BindPort 110 zimbraImapBindPort 143 zimbraPop3SSLBindPort 995 zimbraImapSSLBindPort 993
tomcat stop tomcat start