Cipher suites: Difference between revisions

mNo edit summary
(30 intermediate revisions by 7 users not shown)
Line 1: Line 1:
= Introduction =
= Using Zimbra with strong TLS configuration =
By default, the Zimbra mailbox server, ''zmmailboxd'', supports both strong and weak SSL/TLS cipher suites for '''IMAPS''', '''POP3S''', and '''HTTPS'''.  A typical security requirement is to disable weak ciphers which usually includes SSL versions prior to SSLv3 and any cipher not supporting at least 128 bit.


= Enable Strong Ciphers =
Transport Layer Security (TLS) encrypts data sent over the Internet to ensure that eavesdroppers and hackers are unable to see what you transmit which is particularly useful for private and sensitive information such as passwords, credit card numbers, and personal correspondence. (further reading: https://www.internetsociety.org/deploy360/tls/basics)
To enable strong ciphers, weak ciphers must be disabled.  It is often best to run a SSL/TLS cipher scan first to see which ciphers your server currently supports. Once the supported weak ciphers are determined, they can be disabled one by one system wide using the '''zimbraSSLExcludeCipherSuites''' global directory attribute.


As of today it is recommended to test HTTPS/SSL against multiple checks:
In this article you will learn how to configure Zimbra to use only strong encryption ciphers for TLS. Configuration settings on this page are routinely validated by our QA team.


[https://www.ssllabs.com/ssltest/index.html SSL Labs (Qualsys)]
= Generate ssl_ciphers for use with zimbraReverseProxySSLCiphers =
[https://sslcheck.globalsign.com GlobalSign]


[https://ssltools.websecurity.symantec.com/checker/#home Verisgin/Symantec]
Since encryption is always evolving it is recommended to use Mozilla SSL Config generator that you can find at https://ssl-config.mozilla.org/ in addition we have to [https://help.deepsecurity.trendmicro.com/10_1/on-premise/Protection-Modules/Intrusion-Prevention/ref-disable-dh.html disable Diffie-Hellman].


To disable weak ciphers use the ''zmprov'' command. Be sure to prefix the attribute name with "+" when using mcf to keep existing values.
Select <code>Intermediate</code> and <code>Nginx</code> (Zimbra proxy is based on Nginx) at the time of writing this article this will select nginx 1.17.7 and OpenSSL 1.1.1d. The tool also reports the oldest supported clients that work with this configuration: Firefox 27, Android 4.4.2, Chrome 31, Edge, IE 11 on Windows 7, Java 8u31, OpenSSL 1.0.1, Opera 20, and Safari 9.


su - zimbra
From the generated config file copy the value from <code>ssl_ciphers</code>:
zmprov mcf +zimbraSSLExcludeCipherSuites <cipher1>
zmprov mcf +zimbraSSLExcludeCipherSuites <cipher2>
zmprov mcf +zimbraSSLExcludeCipherSuites <cipher...>
zmprov mcf +zimbraSSLExcludeCipherSuites <cipherN>
zmmailboxdctl restart


This is the current listing as of ZCS 8.0.7 according to SSL Verification test by
<pre>ssl_ciphers !DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;</pre>
[https://www.ssllabs.com/ssltest/index.html Qualsys SSL Test]
= Configuring Zimbra Proxy Nginx =


  su - zimbra
Configure Zimbra to use the above ciphers, and enable TLSv1.2 and TLSv1.3 like this:


  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_DHE_DSS_WITH_DES_CBC_SHA
<pre>zmprov mcf zimbraReverseProxySSLProtocols TLSv1.2
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
zmprov mcf +zimbraReverseProxySSLProtocols TLSv1.3
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_DHE_RSA_WITH_DES_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_RSA_EXPORT_WITH_RC4_40_MD5
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_RSA_WITH_3DES_EDE_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites SSL_RSA_WITH_DES_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_RSA_EXPORT_WITH_DES40_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_RSA_WITH_DES_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  zmprov mcf +zimbraSSLExcludeCipherSuites TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA


  zmmailboxdctl restart
zmprov -l mcf zimbraReverseProxySSLCiphers '!DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'


We're working on Jetty Configuration to get at least an A- Rating at [https://www.ssllabs.com/ssltest/index.html SSL Labs (Qualsys)].
zmproxyctl restart</pre>
= Configuring Zimbra Mailbox =


= Bugs =
Also configure Zimbra mailbox to allow the use of TLSv1.3. Open in a text editor <code>/opt/zimbra/conf/localconfig.xml</code> find the line <code>mailboxd_java_options</code> and set <code>TLSv1.2,TLSv1.3</code> in <code>https.protocols</code> and <code>jdk.tls.client.protocols</code>. Example result:
Prior to ZCS 5.0.10, the zimbraSSLExcludeCipherSuites attribute values are not picked up by the Jetty configuration for HTTPS. To fix, replace all occurrences of ''zimbraSSLExcludeCipherSuites'' with ''zimbraSSLExcludeCipherSuitesXML'' in ''/opt/zimbra/jetty/etc/jetty.xml.in''.


cd /opt/zimbra/jetty/etc
<pre>&lt;key name=&quot;mailboxd_java_options&quot;&gt;
sed 's/%%zimbraSSLExcludeCipherSuites%%/%%zimbraSSLExcludeCipherSuitesXML%%/g' jetty.xml.in > /tmp/jetty.xml.in.new
  &lt;value&gt;-server -Dhttps.protocols=TLSv1.2,TLSv1.3 -Djdk.tls.client.protocols=TLSv1.2,TLSv1.3 -Djava.awt.headless=true -Dsun.net.inetaddr.ttl=${networkaddress_cache_ttl} -Dorg.apache.jasper.compiler.disablejsr199=true -XX:+UseG1GC -XX:SoftRefLRUPolicyMSPerMB=1 -XX:+UnlockExperimentalVMOptions -XX:G1NewSizePercent=15 -XX:G1MaxNewSizePercent=45 -XX:-OmitStackTraceInFastThrow -verbose:gc -Xlog:gc*=info,safepoint=info:file=/opt/zimbra/log/gc.log:time:filecount=20,filesize=10m -Djava.net.preferIPv4Stack=true&lt;/value&gt;
cp jetty.xml.in /tmp/jetty.xml.in.old
&lt;/key&gt;</pre>
mv /tmp/jetty.xml.in.new jetty.xml.in
Then restart mailbox, or reboot your server:
zmmailboxdctl restart


Please see [http://bugzilla.zimbra.com/show_bug.cgi?id=30691 bug 30691] for more details. 
<pre>zmmailboxdctl restart</pre>
== Configure additional HTTP headers ==


= References =
The following headers will:
''J2SE cipher list'' http://java.sun.com/j2se/1.4.2/docs/guide/security/jsse/JSSERefGuide.html#SunJSSE


''OpenSSL ciphers list'' http://openssl.org/docs/apps/ciphers.html#SSL_v3_0_cipher_suites_
* Enable HTTP Strict Transport Security (HSTS)
* Disable search indexing of your server by Google et al.


<pre>zmprov mcf +zimbraResponseHeader &quot;Strict-Transport-Security: max-age=31536000; includeSubDomains&quot;
zmprov mcf +zimbraResponseHeader &quot;X-Content-Type-Options: nosniff&quot;
zmprov mcf +zimbraResponseHeader &quot;X-Robots-Tag: noindex&quot;
zmprov mcf +zimbraResponseHeader &quot;Referrer-Policy: no-referrer&quot;
zmprov mcf zimbraMailKeepOutWebCrawlers TRUE
zmmailboxdctl restart</pre>
= DH parameters =


{{Article Footer|Zimbra Collaboration Suite 5.0.9|10/1/2008}}
While we disable Diffie-Hellman for Zimbra Proxy and MTA, Diffie-Hellman may still be used by other Zimbra services. Use pre-defined DHE groups as recommended by [https://tools.ietf.org/html/rfc7919 IETF RFC 7919].


[[Category: SSL/TLS]]
Further reading:
[[Category: Mailbox]]
 
* https://weakdh.org/
* https://github.com/internetstandards/dhe_groups
 
<pre>wget https://raw.githubusercontent.com/internetstandards/dhe_groups/master/ffdhe4096.pem -O /etc/ffdhe4096.pem
su - zimbra
zmprov mcf zimbraSSLDHParam /etc/ffdhe4096.pem</pre>
Reboot the server.
 
= Configuring Zimbra MTA Postfix =
 
Postfix traffic is not routed through Zimbra proxy. Below commands show how to configure Zimbra MTA to use only strong TLS ciphers. In 2021 not all mail servers on the Internet support encryption. For maximum compatibility it is still recommended to use <code>Opportunistic TLS</code>. So that you can receive email via unencrypted transmissions. However you can set zimbraMtaTlsSecurityLevel to encrypt to force the use of TLS. This ''will'' result in mail delivery issues.
 
To test the current state of the MTA run from the MTA:
 
<pre>nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com
nmap --script ssl-enum-ciphers -p 465 your-mta-server.example.com</pre>
The last line of output with Zimbra default config: least strength: F
 
<pre>openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1</pre>
Then the following configuration will remove weak ciphers and disable some Postfix options that are considered unsecure.
 
Find the current list of ciphers for Postfix via:
 
https://ssl-config.mozilla.org/#server=postfix
 
Configure it in Zimbra using:
 
<pre>zmprov mcf zimbraMtaSmtpdTlsCiphers medium
zmprov mcf zimbraMtaSmtpdTlsMandatoryCiphers  medium
zmprov mcf zimbraMtaSmtpdTlsProtocols '&gt;=TLSv1.2'
zmprov mcf zimbraMtaTlsSecurityLevel may
postconf -e fast_flush_domains=&quot;&quot;
postconf -e smtpd_etrn_restrictions=reject
postconf -e disable_vrfy_command=yes
postconf -e tls_medium_cipherlist='!DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'
postconf -e tls_preempt_cipherlist=no
 
zmprov gs `zmhostname` zimbraMtaTlsAuthOnly
zmprov ms `zmhostname` zimbraMtaTlsAuthOnly TRUE # if not already (this is default)
zmmtactl restart</pre>
'''''IT IS VERY IMPORTANT tls_medium_cipherlist IS SET, setting just medium or high in zimbraMtaSmtpdTlsCiphers/zimbraMtaSmtpdTlsMandatoryCiphers will not work!!'''''
 
Above config was tested with email from Gmail (uses tls), Ubuntu 20 Postfix (uses tls), from Zimbra itself (uses lmtp) and http://ismyemailworking.com/ (uses plain text) and this all works.
 
Run again to verify your set-up:
 
<pre>nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com
nmap --script ssl-enum-ciphers -p 465 your-mta-server.example.com</pre>
The last line of output with Zimbra new config: least strength: A
 
It seems TLS v1.3 is either not enabled or not tested via nmap, but you can verify that like so:
 
<pre>openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_3
 
openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1</pre>
Please note that you can best run nmap/openssl commands on your MTA server to avoid firewall and network blocking issues of port 25.
 
= Configuring Zimbra LDAP OpenLDAP =
 
Zimbra stores passwords in LDAP and is not proxied via Zimbra proxy. To find your current TLS protocols and ciphers you can run nmap, but you will need a recent version of nmap.
 
<pre>nmap --script ssl-enum-ciphers -p 389 your-ldap-server.example.com</pre>
Check and see if TLSv1.0 and TLSv1.1 are enabled (default) and what the least strength cipher is for TLSv1.2 and above (default: A).
 
To force the use of TLS &gt;= v1.2 with strong Ciphers run the following:
 
<pre>zmlocalconfig -e ldap_common_tlsprotocolmin=&quot;3.3&quot;
zmlocalconfig -e ldap_common_tlsciphersuite=&quot;HIGH&quot;</pre>
In addition require TLS for LDAP (disable unencrypted LDAP) via:
 
<pre>zmlocalconfig -e ldap_starttls_supported=1
zmlocalconfig -e zimbra_require_interprocess_security=1
zmlocalconfig -e ldap_starttls_required=true</pre>
For this change it is recommended to restart Zimbra using <code>zmcontrol restart</code>.
 
= Configuring POP3 =
 
It is recommended you disable the use of POP3 via a host firewall, in case you want to use POP3 anyway, disable the unencrypted sending of username and password and force the use of encryption with the following command:
 
<pre>zmprov ms `zmhostname` zimbraPop3CleartextLoginEnabled FALSE</pre>
Verify that TLS is required for POP3 via Zimbra Proxy, the setting should be <code>only</code> which is default.
 
<pre>zmprov gs `zmhostname` zimbraReverseProxyPop3StartTlsMode
zimbraReverseProxyPop3StartTlsMode: only</pre>
With the above setting the Zimbra POP3 implementation requires the client to issue the STLS command. This command will switch from cleartext to encrypted communications.
 
If the STLS command is not issued, any command the client sends such as AUTH or USER to Zimbra will result in an error and the client will not try authentication. This means the password is not send without encryption. In addition email contents and attachments are also transmitted using encrypted communication.
 
== False positives in OpenVAS and warnings in email clients such as Thunderbird ==
 
Email clients and vulnerability scanner can send some commands in plain text to Zimbra, such as CAPA (to list capabilities) and Zimbra will respond to these without encryption. This will make vulnerability scanners such as OpenVAS believe POP3 is enabled for unencrypted connections. This is however not the case. The false positive will look like this:
 
<code>The remote host is running a POP3 daemon that allows cleartext logins over unencrypted connections.</code>
 
For the same reason you can add your Zimbra account with POP3 to Thunderbird (and other clients) and select <code>Connection security: none</code> this will trigger a warning, saying your credentials will be transmitted without encryption. In reality the communication between the client and Zimbra will halt because of errors before authentication unless TLS is used.
 
This has been verified by using Wireshark.
 
= Configuring IMAP =
 
It is recommended you disable the use of IMAP via a host firewall, in case you want to use IMAP anyway, very that you have the following settings, that are the default and disable the unencrypted sending of username and password and force the use of encryption with the following command:
 
<pre>zmprov gs `zmhostname` zimbraImapCleartextLoginEnabled
zmprov ms `zmhostname` zimbraImapCleartextLoginEnabled FALSE # if not already</pre>
Verify that TLS is required for IMAP via Zimbra Proxy, the setting should be <code>only</code> which is default.
 
<pre>zmprov gs `zmhostname` zimbraReverseProxyImapStartTlsMode
zimbraReverseProxyImapStartTlsMode: only</pre>
= Configuring Admin UI =
 
It is not recommended to expose the Admin UI to the Internet. Instead administrators should access Admin UI via a VPN. In any case you will need to make sure to proxy the Admin UI via Zimbra Proxy to make sure it uses the best TLS configuration. This means you should access Admin UI via the proxied port 9071, and deny access to port 7071 via a firewall. To enable this you should run as user Zimbra:
 
<pre>/opt/zimbra/libexec/zmproxyconfig -e -w -C -H `zmhostname`
zmproxyctl restart</pre>
= Validate your settings online using SSL Labs =
 
Go to https://www.ssllabs.com/ssltest/analyze.html and enter the the domain name of your Zimbra server. If you followed the steps in this article you should receive an A+ score and there should be no mention of weak ciphers in the report. This article was written in September 2021. In the report take a look at the client devices listed under <code>Handshake Simulation</code> these will give you an idea of the devices your users can use to connect to your Zimbra server. Also validate there are no weak ciphers listed under <code>Cipher Suites</code>.
 
= Further reading =
 
* https://wiki.zimbra.com/wiki/SecureConfiguration
* https://wiki.zimbra.com/wiki/Postconf_keys

Revision as of 10:51, 23 March 2023

Using Zimbra with strong TLS configuration

Transport Layer Security (TLS) encrypts data sent over the Internet to ensure that eavesdroppers and hackers are unable to see what you transmit which is particularly useful for private and sensitive information such as passwords, credit card numbers, and personal correspondence. (further reading: https://www.internetsociety.org/deploy360/tls/basics)

In this article you will learn how to configure Zimbra to use only strong encryption ciphers for TLS. Configuration settings on this page are routinely validated by our QA team.

Generate ssl_ciphers for use with zimbraReverseProxySSLCiphers

Since encryption is always evolving it is recommended to use Mozilla SSL Config generator that you can find at https://ssl-config.mozilla.org/ in addition we have to disable Diffie-Hellman.

Select Intermediate and Nginx (Zimbra proxy is based on Nginx) at the time of writing this article this will select nginx 1.17.7 and OpenSSL 1.1.1d. The tool also reports the oldest supported clients that work with this configuration: Firefox 27, Android 4.4.2, Chrome 31, Edge, IE 11 on Windows 7, Java 8u31, OpenSSL 1.0.1, Opera 20, and Safari 9.

From the generated config file copy the value from ssl_ciphers:

ssl_ciphers !DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;

Configuring Zimbra Proxy Nginx

Configure Zimbra to use the above ciphers, and enable TLSv1.2 and TLSv1.3 like this:

zmprov mcf zimbraReverseProxySSLProtocols TLSv1.2
zmprov mcf +zimbraReverseProxySSLProtocols TLSv1.3

zmprov -l mcf zimbraReverseProxySSLCiphers '!DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'

zmproxyctl restart

Configuring Zimbra Mailbox

Also configure Zimbra mailbox to allow the use of TLSv1.3. Open in a text editor /opt/zimbra/conf/localconfig.xml find the line mailboxd_java_options and set TLSv1.2,TLSv1.3 in https.protocols and jdk.tls.client.protocols. Example result:

<key name="mailboxd_java_options">
  <value>-server -Dhttps.protocols=TLSv1.2,TLSv1.3 -Djdk.tls.client.protocols=TLSv1.2,TLSv1.3 -Djava.awt.headless=true -Dsun.net.inetaddr.ttl=${networkaddress_cache_ttl} -Dorg.apache.jasper.compiler.disablejsr199=true -XX:+UseG1GC -XX:SoftRefLRUPolicyMSPerMB=1 -XX:+UnlockExperimentalVMOptions -XX:G1NewSizePercent=15 -XX:G1MaxNewSizePercent=45 -XX:-OmitStackTraceInFastThrow -verbose:gc -Xlog:gc*=info,safepoint=info:file=/opt/zimbra/log/gc.log:time:filecount=20,filesize=10m -Djava.net.preferIPv4Stack=true</value>
</key>

Then restart mailbox, or reboot your server:

zmmailboxdctl restart

Configure additional HTTP headers

The following headers will:

  • Enable HTTP Strict Transport Security (HSTS)
  • Disable search indexing of your server by Google et al.
zmprov mcf +zimbraResponseHeader "Strict-Transport-Security: max-age=31536000; includeSubDomains"
zmprov mcf +zimbraResponseHeader "X-Content-Type-Options: nosniff"
zmprov mcf +zimbraResponseHeader "X-Robots-Tag: noindex"
zmprov mcf +zimbraResponseHeader "Referrer-Policy: no-referrer"
zmprov mcf zimbraMailKeepOutWebCrawlers TRUE
zmmailboxdctl restart

DH parameters

While we disable Diffie-Hellman for Zimbra Proxy and MTA, Diffie-Hellman may still be used by other Zimbra services. Use pre-defined DHE groups as recommended by IETF RFC 7919.

Further reading:

wget https://raw.githubusercontent.com/internetstandards/dhe_groups/master/ffdhe4096.pem -O /etc/ffdhe4096.pem
su - zimbra
zmprov mcf zimbraSSLDHParam /etc/ffdhe4096.pem

Reboot the server.

Configuring Zimbra MTA Postfix

Postfix traffic is not routed through Zimbra proxy. Below commands show how to configure Zimbra MTA to use only strong TLS ciphers. In 2021 not all mail servers on the Internet support encryption. For maximum compatibility it is still recommended to use Opportunistic TLS. So that you can receive email via unencrypted transmissions. However you can set zimbraMtaTlsSecurityLevel to encrypt to force the use of TLS. This will result in mail delivery issues.

To test the current state of the MTA run from the MTA:

nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com
nmap --script ssl-enum-ciphers -p 465 your-mta-server.example.com

The last line of output with Zimbra default config: least strength: F

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1

Then the following configuration will remove weak ciphers and disable some Postfix options that are considered unsecure.

Find the current list of ciphers for Postfix via:

https://ssl-config.mozilla.org/#server=postfix

Configure it in Zimbra using:

zmprov mcf zimbraMtaSmtpdTlsCiphers medium
zmprov mcf zimbraMtaSmtpdTlsMandatoryCiphers  medium
zmprov mcf zimbraMtaSmtpdTlsProtocols '>=TLSv1.2'
zmprov mcf zimbraMtaTlsSecurityLevel may
postconf -e fast_flush_domains=""
postconf -e smtpd_etrn_restrictions=reject
postconf -e disable_vrfy_command=yes
postconf -e tls_medium_cipherlist='!DH:!EDH:!ADH:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'
postconf -e tls_preempt_cipherlist=no

zmprov gs `zmhostname` zimbraMtaTlsAuthOnly
zmprov ms `zmhostname` zimbraMtaTlsAuthOnly TRUE # if not already (this is default)
zmmtactl restart

IT IS VERY IMPORTANT tls_medium_cipherlist IS SET, setting just medium or high in zimbraMtaSmtpdTlsCiphers/zimbraMtaSmtpdTlsMandatoryCiphers will not work!!

Above config was tested with email from Gmail (uses tls), Ubuntu 20 Postfix (uses tls), from Zimbra itself (uses lmtp) and http://ismyemailworking.com/ (uses plain text) and this all works.

Run again to verify your set-up:

nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com
nmap --script ssl-enum-ciphers -p 465 your-mta-server.example.com

The last line of output with Zimbra new config: least strength: A

It seems TLS v1.3 is either not enabled or not tested via nmap, but you can verify that like so:

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_3

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1

Please note that you can best run nmap/openssl commands on your MTA server to avoid firewall and network blocking issues of port 25.

Configuring Zimbra LDAP OpenLDAP

Zimbra stores passwords in LDAP and is not proxied via Zimbra proxy. To find your current TLS protocols and ciphers you can run nmap, but you will need a recent version of nmap.

nmap --script ssl-enum-ciphers -p 389 your-ldap-server.example.com

Check and see if TLSv1.0 and TLSv1.1 are enabled (default) and what the least strength cipher is for TLSv1.2 and above (default: A).

To force the use of TLS >= v1.2 with strong Ciphers run the following:

zmlocalconfig -e ldap_common_tlsprotocolmin="3.3"
zmlocalconfig -e ldap_common_tlsciphersuite="HIGH"

In addition require TLS for LDAP (disable unencrypted LDAP) via:

zmlocalconfig -e ldap_starttls_supported=1
zmlocalconfig -e zimbra_require_interprocess_security=1
zmlocalconfig -e ldap_starttls_required=true

For this change it is recommended to restart Zimbra using zmcontrol restart.

Configuring POP3

It is recommended you disable the use of POP3 via a host firewall, in case you want to use POP3 anyway, disable the unencrypted sending of username and password and force the use of encryption with the following command:

zmprov ms `zmhostname` zimbraPop3CleartextLoginEnabled FALSE

Verify that TLS is required for POP3 via Zimbra Proxy, the setting should be only which is default.

zmprov gs `zmhostname` zimbraReverseProxyPop3StartTlsMode
zimbraReverseProxyPop3StartTlsMode: only

With the above setting the Zimbra POP3 implementation requires the client to issue the STLS command. This command will switch from cleartext to encrypted communications.

If the STLS command is not issued, any command the client sends such as AUTH or USER to Zimbra will result in an error and the client will not try authentication. This means the password is not send without encryption. In addition email contents and attachments are also transmitted using encrypted communication.

False positives in OpenVAS and warnings in email clients such as Thunderbird

Email clients and vulnerability scanner can send some commands in plain text to Zimbra, such as CAPA (to list capabilities) and Zimbra will respond to these without encryption. This will make vulnerability scanners such as OpenVAS believe POP3 is enabled for unencrypted connections. This is however not the case. The false positive will look like this:

The remote host is running a POP3 daemon that allows cleartext logins over unencrypted connections.

For the same reason you can add your Zimbra account with POP3 to Thunderbird (and other clients) and select Connection security: none this will trigger a warning, saying your credentials will be transmitted without encryption. In reality the communication between the client and Zimbra will halt because of errors before authentication unless TLS is used.

This has been verified by using Wireshark.

Configuring IMAP

It is recommended you disable the use of IMAP via a host firewall, in case you want to use IMAP anyway, very that you have the following settings, that are the default and disable the unencrypted sending of username and password and force the use of encryption with the following command:

zmprov gs `zmhostname` zimbraImapCleartextLoginEnabled
zmprov ms `zmhostname` zimbraImapCleartextLoginEnabled FALSE # if not already

Verify that TLS is required for IMAP via Zimbra Proxy, the setting should be only which is default.

zmprov gs `zmhostname` zimbraReverseProxyImapStartTlsMode
zimbraReverseProxyImapStartTlsMode: only

Configuring Admin UI

It is not recommended to expose the Admin UI to the Internet. Instead administrators should access Admin UI via a VPN. In any case you will need to make sure to proxy the Admin UI via Zimbra Proxy to make sure it uses the best TLS configuration. This means you should access Admin UI via the proxied port 9071, and deny access to port 7071 via a firewall. To enable this you should run as user Zimbra:

/opt/zimbra/libexec/zmproxyconfig -e -w -C -H `zmhostname`
zmproxyctl restart

Validate your settings online using SSL Labs

Go to https://www.ssllabs.com/ssltest/analyze.html and enter the the domain name of your Zimbra server. If you followed the steps in this article you should receive an A+ score and there should be no mention of weak ciphers in the report. This article was written in September 2021. In the report take a look at the client devices listed under Handshake Simulation these will give you an idea of the devices your users can use to connect to your Zimbra server. Also validate there are no weak ciphers listed under Cipher Suites.

Further reading

Jump to: navigation, search