Difference between revisions of "Cipher suites"

Line 88: Line 88:
 
postconf -e tls_medium_cipherlist="ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
 
postconf -e tls_medium_cipherlist="ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
 
postconf -e tls_preempt_cipherlist=no
 
postconf -e tls_preempt_cipherlist=no
 +
 +
zmprov gs `zmhostname` zimbraMtaTlsAuthOnly
 +
zmprov ms `zmhostname` zimbraMtaTlsAuthOnly TRUE # if not already (this is default)
 
zmmtactl restart</pre>
 
zmmtactl restart</pre>
 
'''''IT IS VERY IMPORTANT tls_medium_cipherlist IS SET, setting just medium or high in zimbraMtaSmtpdTlsCiphers/zimbraMtaSmtpdTlsMandatoryCiphers will not work!!'''''
 
'''''IT IS VERY IMPORTANT tls_medium_cipherlist IS SET, setting just medium or high in zimbraMtaSmtpdTlsCiphers/zimbraMtaSmtpdTlsMandatoryCiphers will not work!!'''''
Line 144: Line 147:
 
For the same reason you can add your Zimbra account with POP3 to Thunderbird (and other clients) and select <code>Connection security: none</code> this will trigger a warning, saying your credentials will be transmitted without encryption. In reality the communication between the client and Zimbra will halt because of errors before authentication unless TLS is used.
 
For the same reason you can add your Zimbra account with POP3 to Thunderbird (and other clients) and select <code>Connection security: none</code> this will trigger a warning, saying your credentials will be transmitted without encryption. In reality the communication between the client and Zimbra will halt because of errors before authentication unless TLS is used.
  
 +
This has been verified by using Wireshark.
 +
 +
= Configuring IMAP =
 +
 +
It is recommended you disable the use of IMAP via a host firewall, in case you want to use IMAP anyway, very that you have the following settings, that are the default and disable the unencrypted sending of username and password and force the use of encryption with the following command:
 +
 +
<pre>zmprov gs `zmhostname` zimbraImapCleartextLoginEnabled
 +
zmprov ms `zmhostname` zimbraImapCleartextLoginEnabled FALSE # if not already</pre>
 +
Verify that TLS is required for IMAP via Zimbra Proxy, the setting should be <code>only</code> which is default.
 +
 +
<pre>zmprov gs `zmhostname` zimbraReverseProxyImapStartTlsMode
 +
zimbraReverseProxyImapStartTlsMode: only</pre>
 
= Validate your settings online using SSL Labs =
 
= Validate your settings online using SSL Labs =
  
 
Go to https://www.ssllabs.com/ssltest/analyze.html and enter the the domain name of your Zimbra server. If you followed the steps in this article you should receive an A+ score and there should be no mention of weak ciphers in the report. This article was written in September 2021. In the report take a look at the client devices listed under <code>Handshake Simulation</code> these will give you an idea of the devices your users can use to connect to your Zimbra server. Also validate there are no weak ciphers listed under <code>Cipher Suites</code>.
 
Go to https://www.ssllabs.com/ssltest/analyze.html and enter the the domain name of your Zimbra server. If you followed the steps in this article you should receive an A+ score and there should be no mention of weak ciphers in the report. This article was written in September 2021. In the report take a look at the client devices listed under <code>Handshake Simulation</code> these will give you an idea of the devices your users can use to connect to your Zimbra server. Also validate there are no weak ciphers listed under <code>Cipher Suites</code>.
 +
 +
= Further reading =
 +
 +
* https://wiki.zimbra.com/wiki/SecureConfiguration

Revision as of 08:48, 6 January 2022

Cipher suites

   KB 2661        Last updated on 2022-01-6  




0.00
(0 votes)


Enable Strong Ciphers

Transport Layer Security (TLS) encrypts data sent over the Internet to ensure that eavesdroppers and hackers are unable to see what you transmit which is particularly useful for private and sensitive information such as passwords, credit card numbers, and personal correspondence. (further reading: https://www.internetsociety.org/deploy360/tls/basics)

In this article you will learn how to configure Zimbra to use only strong encryption ciphers for TLS.

Generate ssl_ciphers for use with zimbraReverseProxySSLCiphers

Since encryption is always evolving it is recommended to use Mozilla SSL Config generator that you can find at https://ssl-config.mozilla.org/

Select Intermediate and Nginx (Zimbra proxy is based on Nginx) at the time of writing this article this will select nginx 1.17.7 and OpenSSL 1.1.1d. The tool also reports the oldest supported clients that work with this configuration: Firefox 27, Android 4.4.2, Chrome 31, Edge, IE 11 on Windows 7, Java 8u31, OpenSSL 1.0.1, Opera 20, and Safari 9.

From the generated config file copy the value from ssl_ciphers:

ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;

Configuring Zimbra Proxy Nginx

Configure Zimbra to use the above ciphers, and enable TLSv1.2 and TLSv1.3 like this:

zmprov mcf zimbraReverseProxySSLProtocols TLSv1.2
zmprov mcf +zimbraReverseProxySSLProtocols TLSv1.3

zmprov -l mcf zimbraReverseProxySSLCiphers 'ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'

zmproxyctl restart

Configuring Zimbra Mailbox

Also configure Zimbra mailbox to allow the use of TLSv1.3. Open in a text editor /opt/zimbra/conf/localconfig.xml find the line mailboxd_java_options and set TLSv1.2,TLSv1.3 in https.protocols and jdk.tls.client.protocols. Example result:

<key name="mailboxd_java_options">
  <value>-server -Dhttps.protocols=TLSv1.2,TLSv1.3 -Djdk.tls.client.protocols=TLSv1.2,TLSv1.3 -Djava.awt.headless=true -Dsun.net.inetaddr.ttl=${networkaddress_cache_ttl} -Dorg.apache.jasper.compiler.disablejsr199=true -XX:+UseG1GC -XX:SoftRefLRUPolicyMSPerMB=1 -XX:+UnlockExperimentalVMOptions -XX:G1NewSizePercent=15 -XX:G1MaxNewSizePercent=45 -XX:-OmitStackTraceInFastThrow -verbose:gc -Xlog:gc*=info,safepoint=info:file=/opt/zimbra/log/gc.log:time:filecount=20,filesize=10m -Djava.net.preferIPv4Stack=true</value>
</key>

Then restart mailbox, or reboot your server:

zmmailboxdctl restart

Configure additional HTTP headers

The following headers will:

  • Enable HTTP Strict Transport Security (HSTS)
  • Disable search indexing of your server by Google et al.
zmprov mcf +zimbraResponseHeader "Strict-Transport-Security: max-age=31536000; includeSubDomains"
zmprov mcf +zimbraResponseHeader "X-XSS-Protection: 1; mode=block"
zmprov mcf +zimbraResponseHeader "X-Content-Type-Options: nosniff"
zmprov mcf +zimbraResponseHeader "X-Robots-Tag: noindex"
zmprov mcf zimbraMailKeepOutWebCrawlers TRUE
zmmailboxdctl restart

Generate DH parameters

Generating DH parameter improves key exchange and mitigates against Logjam attack. Run as Zimbra user. Further reading: https://weakdh.org/

su - zimbra
/opt/zimbra/common/bin/openssl dhparam -out /opt/zimbra/conf/dhparam.pem.zcs 3072
zmprov mcf zimbraSSLDHParam /opt/zimbra/conf/dhparam.pem.zcs

Reboot the server.

Configuring Zimbra MTA Postfix

Postix traffic is not routed through Zimbra proxy. Below commands show how to configure Zimbra MTA to use only strong TLS ciphers. In 2021 not all mail servers on the Internet support encryption. For maximum compatibility it is still recommended to use Opportunistic TLS. So that you can receive email via unencrypted transmissions. However you can set zimbraMtaTlsSecurityLevel to encrypt to force the use of TLS. This will result in mail delivery issues.

To test the current state of the MTA run from the MTA:

nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com

The last line of output with Zimbra default config: least strength: F

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1

Then the following configuration will remove weak ciphers and disable some Postfix options that are considered unsecure.

Find the current list of ciphers for Postfix via:

https://ssl-config.mozilla.org/#server=postfix

Configure it in Zimbra using:

zmprov mcf zimbraMtaSmtpdTlsCiphers medium
zmprov mcf zimbraMtaSmtpdTlsMandatoryCiphers  medium
zmprov mcf zimbraMtaSmtpdTlsProtocols '>=TLSv1.2'
zmprov mcf zimbraMtaTlsSecurityLevel may
postconf -e fast_flush_domains=""
postconf -e smtpd_etrn_restrictions=reject
postconf -e disable_vrfy_command=yes
postconf -e tls_medium_cipherlist="ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384"
postconf -e tls_preempt_cipherlist=no

zmprov gs `zmhostname` zimbraMtaTlsAuthOnly
zmprov ms `zmhostname` zimbraMtaTlsAuthOnly TRUE # if not already (this is default)
zmmtactl restart

IT IS VERY IMPORTANT tls_medium_cipherlist IS SET, setting just medium or high in zimbraMtaSmtpdTlsCiphers/zimbraMtaSmtpdTlsMandatoryCiphers will not work!!

Above config was tested with email from Gmail (uses tls), Ubuntu 20 Postfix (uses tls), from Zimbra itself (uses lmtp) and http://ismyemailworking.com/ (uses plain text) and this all works.

Run again to verify your set-up:

nmap --script ssl-enum-ciphers -p 25 your-mta-server.example.com

The last line of output with Zimbra new config: least strength: A

It seems TLS v1.3 is either not enabled or not tested via nmap, but you can verify that like so:

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_3

openssl s_client -starttls smtp -showcerts -connect your-mta-server.example.com:25 -servername your-mta-server.example.com -tls1_1

Please note that you can best run nmap/openssl commands on your MTA server to avoid firewall and network blocking issues of port 25.

Configuring Zimbra LDAP OpenLDAP

Zimbra stores passwords in LDAP and is not proxied via Zimbra proxy. To find your current TLS protocols and ciphers you can run nmap, but you will need a recent version of nmap.

nmap --script ssl-enum-ciphers -p 389 your-ldap-server.example.com

Check and see if TLSv1.0 and TLSv1.1 are enabled (default) and what the least strength cipher is for TLSv1.2 and above (default: A).

To force the use of TLS >= v1.2 with strong Ciphers run the following:

zmlocalconfig -e ldap_common_tlsprotocolmin="3.3"
zmlocalconfig -e ldap_common_tlsciphersuite="HIGH"

In addition require TLS for LDAP (disable unencrypted LDAP) via:

zmlocalconfig -e ldap_starttls_supported=1
zmlocalconfig -e zimbra_require_interprocess_security=1
zmlocalconfig -e ldap_starttls_required=true

For this change it is recommended to restart Zimbra using zmcontrol restart.

Configuring POP3

It is recommended you disable the use of POP3 via a host firewall, in case you want to use POP3 anyway, disable the unencrypted sending of username and password and force the use of encryption with the following command:

zmprov ms `zmhostname` zimbraPop3CleartextLoginEnabled FALSE

Verify that TLS is required for POP3 via Zimbra Proxy, the setting should be only which is default.

zmprov gs `zmhostname` zimbraReverseProxyPop3StartTlsMode
zimbraReverseProxyPop3StartTlsMode: only

With the above setting the Zimbra POP3 implementation requires the client to issue the STLS command. This command will switch from cleartext to encrypted communications.

If the STLS command is not issued, any command the client sends such as AUTH or USER to Zimbra will result in an error and the client will not try authentication. This means the password is not send without encryption. In addition email contents and attachments are also transmitted using encrypted communication.

False positives in OpenVAS and warnings in email clients such as Thunderbird

Email clients and vulnerability scanner can send some commands in plain text to Zimbra, such as CAPA (to list capabilities) and Zimbra will respond to these without encryption. This will make vulnerability scanners such as OpenVAS believe POP3 is enabled for unencrypted connections. This is however not the case. The false positive will look like this:

The remote host is running a POP3 daemon that allows cleartext logins over unencrypted connections.

For the same reason you can add your Zimbra account with POP3 to Thunderbird (and other clients) and select Connection security: none this will trigger a warning, saying your credentials will be transmitted without encryption. In reality the communication between the client and Zimbra will halt because of errors before authentication unless TLS is used.

This has been verified by using Wireshark.

Configuring IMAP

It is recommended you disable the use of IMAP via a host firewall, in case you want to use IMAP anyway, very that you have the following settings, that are the default and disable the unencrypted sending of username and password and force the use of encryption with the following command:

zmprov gs `zmhostname` zimbraImapCleartextLoginEnabled
zmprov ms `zmhostname` zimbraImapCleartextLoginEnabled FALSE # if not already

Verify that TLS is required for IMAP via Zimbra Proxy, the setting should be only which is default.

zmprov gs `zmhostname` zimbraReverseProxyImapStartTlsMode
zimbraReverseProxyImapStartTlsMode: only

Validate your settings online using SSL Labs

Go to https://www.ssllabs.com/ssltest/analyze.html and enter the the domain name of your Zimbra server. If you followed the steps in this article you should receive an A+ score and there should be no mention of weak ciphers in the report. This article was written in September 2021. In the report take a look at the client devices listed under Handshake Simulation these will give you an idea of the devices your users can use to connect to your Zimbra server. Also validate there are no weak ciphers listed under Cipher Suites.

Further reading

Jump to: navigation, search