CLI zmtlsctl to set Web Server Mode

Revision as of 19:34, 15 April 2009 by Mmorse (talk | contribs)

zmtlsctl

This command is used to set the Web server zimbraMailMode to the different communication protocol options. All modes use SSL encryption for back-end administrative traffic & the admin console.

The webserver has to be stopped and restarted for the change to take effect. Though a full zmcontrol stop/start certainly can't hurt.

Syntax

zmtlsctl [mode]

mode choices:

http - http only, the user would browse to http://zimbra.domain.com

https - https only, the user would browse to https://zimbra.domain.com They may or may not get a 302 redirect if they visit http://

mixed - If the user goes to http:// it will redirect to https:// for the login only, then will revert to http:// for normal session traffic. If they browse to https:// then they will stay https://

both - A user can go to http:// or https:// and will keep that mode for their entire session

-On older versions there were some quirks with 'both' mode; fine from 4.5.2 to 4.5.5? but new issue appeared bug 19636

-As a quick fix, when 'both' was selected, it defaulted to 'mixed' bug 5594

-As of 5.0.5+ bug 5594 is now resolved

Beginning with ZCS 5.0:

redirect - like mixed, if the user goes to http:// it will redirect to https:// but they will stay https:// for their entire session.

Steps to run

1.

Type zmtlsctl [mode] , press Enter.

2.

Type zmcontrol stop , press Enter.

3.

after everything stops, type zmcontrol start , press Enter.


Note: In you can also use tomcat stop/start/restart, but in v5 this becomes jetty (zmmailboxdctl stop/start/restart).


Afterwards: Check SMTP_Auth_Problems to be sure the auth url is set correctly.

Jump to: navigation, search