Difference between revisions of "Building FRANKLIN on CentOS 5"

m (Setting up the build environment)
Line 64: Line 64:
=== Installing RPMForge repositories ===
=== Installing RPMForge repositories ===
Stock CentOS5 install has only a few basic repositories configured. You should definitely add the ''Dag'' repository to your yum repositories.You can get the repository information and instructions from http://dag.wieers.com/rpm/packages/rpmforge-release.
=== Installing buildtime dependencies ===
=== Installing buildtime dependencies ===
Line 234: Line 236:
== Preparing the build environment ==
Stock CentOS5 install has only a few basic repositories configured. You need to add ''rpmforge'' to your list of yum repositories. You can get the repository information and instructions from http://dag.wieers.com/rpm/packages/rpmforge-release.
== Troubleshooting ==
== Troubleshooting ==

Revision as of 09:08, 3 December 2008


Building Zimbra from source is necessary if we want to make modifications to it. The binary release of the so-called open source version is released under a restrictive ZEULA (Zimbra End-user License Agreement), which disallows any modifications. Building Zimbra from source allows us to use the less restrictive YPL 1.1 (Yahoo Public License). Even though the YPL 1.1 is not an OSI-approved license, it still allows modifications. It is "badgeware", though, meaning that Zimbra/Yahoo logos need to be included in any modifications.

The build process for Zimbra is poorly documented. You won't find many useful articles from the Zimbra wiki or from the forums. Lots of the articles are obsolete. The only really good instructions are here, provided by the Zimbra Community Builds project. Currently (3rd Dec 2008) the only other useful articles in the Zimbra wiki are located here

I've filed several bug reports related to CentOS5 build process:

Until these problems are fixed, you will stumble upon them.

Alternatives to source install

  • If ZEULA restrictions are not a concern, use the ZCS "Open Source Edition" binary installer, which is trivial to install
  • If you're willing to run Zimbra on Ubuntu or Solaris, get the appropriate packages from Zimbra Community Builds. They might (or might not) work.
  • If you require Outlook support, Symbian mobile clients or such, get the trial version for a commercial version of Zimbra.

Overview of the build process

The Zimbra build process well described in these two articles:

Use the Solaris instructions only as a reference. According to dijichi, Zimbra Community Builds project manager, the Solaris instructions are more up-to-date. Unlike stated in Solaris instructions you should probably add the environment variables to /etc/profile.d/zimbra.sh instead of /etc/profile directly.

The basic build steps are these:

  • Get the source (p4 or Zimbra community builds)
  • Set up the build environment
  • Build ThirdParty modules
  • Build memcached, nginx and tcmalloc in ThirdParty
  • Build Zimbra modules

Getting the source

There are two main places where to get the Zimbra sources:

The latest Zimbra code - including the ThirdParty packages - is located in a proprietary Perforce (p4) repository. If you're doing a production build, you should try to download a stable branch. In case you're going to do development, you should probably get HEAD (=development branch). I probably downloaded HEAD at first, as there were numerous stupid errors in the build files that I had to fix.

To get FRANKLIN (ZCS 5.0.x) from Perforce repositories, you need to get the proprietary Perforce (P4) client from http://www.perforce.com/perforce/downloads/index.html

Once p4 binary is installed, do the following:

$ mkdir -p /home/public/p4
$ export P4EDITOR=nano
$ export P4PORT=codes.zimbra.com:2666
$ p4 -u public -P public1234 -c public-view sync -f //depot/zcs/FRANKLIN/...

You set the variables in root's $HOME/.bashrc, /etc/profile.d/zimbra.sh or whereever you'd like. That way you don't have to retype them every time you check out the sources. The mkdir is required, because that's where Perforce wants it's stuff to go. It's probably possible to change it's behavior, but hacking around it is faster. After running this command you should have Zimbra sources in /home/public/p4/FRANKLIN/. If you wish to use another directory, you should symlink it to /home/public/p4 to avoid trouble later on. Zimbra's build system assumes some files are located there.

An alternative to getting sources from Zimbra's Perforce repository is to download the Zimbra Community Build sources located here. Make sure you don't download FRANKLIN-5010.tar.gz as it's full of files with Windows linefeeds which render it useless.

Setting up the build environment

Installing RPMForge repositories

Stock CentOS5 install has only a few basic repositories configured. You should definitely add the Dag repository to your yum repositories.You can get the repository information and instructions from http://dag.wieers.com/rpm/packages/rpmforge-release.

Installing buildtime dependencies

Zimbra's buildtime and runtime dependencies are very poorly documented. Run-time dependencies are check when you run install.sh in ZimbraBuild/zcs-5.0.10-something.CentOS5.FRANKLIN. They're not an issue when building Zimbra, but you can use the techniques outlined below to fix them.

Even though you should install all documented dependencies, they don't get you very far. A typical Zimbra build goes like this:

  • try building
  • build fails
  • check the error message
  • find out which package contains the missing dependency
  • install the missing dependency
  • try building
  • etc.

I won't even try listing all the dependencies. Instead, I'll show what to do when a dependency is missing.

If the error message tells you which software package is missing, you can just guess the package name

$ yum search something
$ yum install something

Most likely you need lots of development packages. They are named something-devel in CentOS. If the build process complains about a single missing file, you can find it by installing yum-utils and then using repoquery to locate the package containing the missing file:

$ yum install yum-utils
$ repoquery -a -f *missing-file

If you get several possible packages, make an educated guess.

Debugging the build process

Build problem categories

You'll most likely encounter lots of errors in the build process. Instead of trying to cover all the cases, which is impossible, I'll outline the debugging process. Causes for Zimbra build problems can be divided into several categories:

  • False assumptions about the build system. For example, the build files assume /home/public/... exists.
  • Undocumented build-time dependencies (there are lots of these)
  • Missing definitions files or directories, in case your OS version is not supported
  • Outdated definition files, such as RPM spec files
  • Wrong program version numbers or paths in build files
  • Version mismatches between the included third party software and OS'es *-devel packages

Missing or faulty file and directories

Zimbra build makes a lot of (false) assumptions about how the system is configured and what directories are available. Luckily the error messages will be rather clear, so these problems are easy to fix. During my CentOS5 install I had to do a couple of things to get things running. Here I assume you've followed the Ubuntu/Solaris build howtos while setting up your system (see above).

P4 downloads fail without this:

$ mkdir -p /home/public/p4

Some build scripts fail without these:

$ mkdir -p /home/public/p4/zcs 
$ ln -s /opt/build.zimbra/source/FRANKLIN /home/public/p4/zcs/main

ThirdParty modules won't build without this:

$ mkdir -p /opt/build.zimbra/source/FRANKLIN/ThirdPartyBuilds&CentOS5

Zimbra modules won't build without these:

$ cd /opt/build.zimbra/source/FRANKLIN/ZimbraBuild/defs/
$ cp RHEL5.def CentOS5.def

You also need to create a JDK tar.gz package and put it to the correct directory:

$ mkdir -p /opt/build.zimbra/source/FRANKLIN/ThirdPartyBuilds/i386/java
$ cd /opt/build.zimbra/source/FRANKLIN/ThirdPartyBuilds/i386/java
$ tar -C /opt -zcf jdk1.5.0_16.tgz jdk1.5.0_16

You probably need to change the Java version in ZimbraBuild/defs/plat_common.def too:

JAVA_VERSION    := 1.5.0_16
JAVA_FILE       := jdk
JAVA_DIR        := java

You might run into trouble when ThirdParty build creates files which are not the same name/version as those defined in actual Zimbra build files. In this case make a symbolic link or copy the file over from older/newer Zimbra source tree (if available).

Missing dependencies

During ThirdParty build process you'll eventually stumble upon missing dependencies. When a component fails, interrupt the build process with CTRL-C, enter the failed component's directory and run the build manually from there. For most components using make is enough, but some use custom build scripts. In that case launch the script instead. Once make has finished and failed, you'll most likely see an error related to a missing header files (something.h).

If Zimbra bundle already contains the necessary header file, there's most likely a problem with some Makefile. For example, the FRANKLIN-5010_2660 has a bug in curl Makefile which caused header file (e.g. curl.h) installation to fail silently. For more information take a look here:

I fixed that issue by copying over ThirdParty/curl from newer sources obtained from Perforce repository, which seemed to work.

If you verify that an external dependency is missing, you must install the correct RPM development package. The easiest to accomplish by installing yum-utils (yum install yum-utils) and then using repoquery:

$ repoquery -f /usr/include/ldap.h

Note that you need to include the full path to the file. Alternatively you can use wildcards like this:

$ repoquery -f "*ldap.h"

Once you know the package name, install it with yum install packagename.

Then enter that component's directory, run make (or in some cases ant) and see that it builds cleanly. Then you can restart the build process. If you're trying to fix a ThirdParty build failure, you might encounter these errors:

1 out of 1 hunk ignored -- saving rejects to file servers/slapd/back-meta/search.c.rej
patching file servers/slapd/back-sql/config.c
Reversed (or previously applied) patch detected!  Assume -R? [n] n 
Apply anyway? [n] n

These are caused by the fact that Zimbra-specific patches have already been applied, but the build file tried to apply them anyway. You can safely say n to all of these. Or just tap return repeatedly

Tips to making the build process faster

It's highly unlikely that Zimbra build will success on the first try. By default the Zimbra build scripts are pretty stupid, as they remove all that was left in the previous run and recompile everything from start. This means that when a ThirdParty module fails, the script recompiles everything all over again. To avoid this, build try building the modules individually until they all succeed.

The correct compile order for Zimbra ThirdParty software can be seen from the ThirdParty/Makefile. In FRANKLIN-5010_2660 community build the correct order is this:

DIRS := openssl \
        mysql \
        sleepycat \
        libxml2 \
        heimdal \
        curl \
        cyrus-sasl \
        openldap \
        aspell \
        clamav \
        apache-httpd \
        php \
        pcre \
        expat \
        popt \
        PostFix \
        dspam \
        rrdtool \

When you fix the failed module, enter the next one's directory, build it and fix it (if necessary) and so on. In the end all modules should have been built. You can use the same technique for building the actual Zimbra modules. You just need to follow this order:


This order was taken from http://varlogmessages.vroomvroom.org/documentation/solaris-port/build-instructions/build-zimbra-server.


This HOWTO covers the basic steps required to build Zimbra. For more information, see these essential documents:

These might be helpful, too:


Zimbra build problems can be divided into a couple main categories:

  • Undocumented, missing dependencies
  • Faulty assumptions about the build environment
  • Problems with the sources or the downloaded source tree

Instead of trying to document every problem I encountered, I'll simply describe how these problems can be circumvented.

Verified Against: unknown Date Created: 4/28/2008
Article ID: https://wiki.zimbra.com/index.php?title=Building_FRANKLIN_on_CentOS_5 Date Modified: 2008-12-03

Try Zimbra

Try Zimbra Collaboration with a 60-day free trial.
Get it now »

Want to get involved?

You can contribute in the Community, Wiki, Code, or development of Zimlets.
Find out more. »

Looking for a Video?

Visit our YouTube channel to get the latest webinars, technology news, product overviews, and so much more.
Go to the YouTube channel »

Jump to: navigation, search