Revision as of 20:05, 13 April 2010 by Ajcody (talk | contribs) (Special Note About Android Phone's)

Attention.png - This article is NOT official Zimbra documentation. It is a user contribution and may include unsupported customizations, references, suggestions, or information.

Mobile & Phone Issues

Actual Mobile & Phone Topics Homepage

Please see Ajcody-Mobile-Topics

Help Me Understand the Mobility Options

Let's break it down to three forms of access for mobile devices.

Mobile Web Client - http://www.zimbra.com/products/mobile_web_browser.html

A. Setups the web access to the Zimbra server to be viewable from a mobile device. This is accessing mail over the "web browser" on the mobile phone.

A1. http://servername.com/zimbra/m/

B. Built in - no license or additional software needed.

Zimbra Mobile - http://www.zimbra.com/products/mobile_smartphone.html

A. This allows two-way, over-the-air synchronization between the mobile device and Zimbra server.

A1. Think of this as "fat client" mail sync'ing on a mobile device

B. This page will describe that process in better detail - http://wiki.zimbra.com/index.php?title=Mobile_Device_Setup

C. License required

Blackberry - http://www.zimbra.com/products/mobile_blackberry.html

A. Blackberry "two-way, over-the-air synchronization" requires the use of a Blackberry server. We use a "connector" on the Blackberry server that allows BES device to use their "fat client" for mail sync'ing.

B. This option requires a separate server, a Windows box that will run the Blackberry server software.

C. Zimbra Mobile license required. Windows Blackberry server require with appropriate Blackberry licenses. Installation of Zimbra BlackberryConnector on the Blackberry server.

Zimbra Mobile/Blackberry requires the license file to enable it. This cost can be discussed with your sales contact. It's only the Blackberry configuration that requires a "software" installation - so to speak. Enabling "Zimbra Mobility/option 2 above" is a license requirement - not a software installation one - and then configuration for the user. "You enable Zimbra Mobile in the ZCS COS or for individual Accounts."

Forum Support For Mobile Options

The Mobility Forum has three sections.

Blackberry (Now GA)


J2ME Client (Beta Product) - Project Stopped

General Mobile Issues

What Devices Are Supported And How-To

I've made the following RFE's recently. I'm hoping we continue doing this going forward as well.

Requests For Support - Assorted

  • Official Support for Palm Pre Phone
    • http://bugzilla.zimbra.com/show_bug.cgi?id=43989
    • Certs and Palm
      • Installing self-signed and privately issued certificates - Palm
      • Steps to setup import of certificate on Palm. You can also use this url to "download" the file to a machine - http://YOURZIMBRAHOSTNAME.com:7071/ca.der - after you setup the ca.der file following these steps.
        * Log into server as root
        cd /opt/zimbra/ssl/zimbra/ca
        openssl x509 -in ca.pem -out ca.der -outform DER
        cp /opt/zimbra/ssl/zimbra/ca/ca.der /opt/zimbra/httpd/htdocs/
        grep x509 /opt/zimbra/httpd/conf/mime.types
        * if it returns:
        application/x-x509-ca-cert der crt
        ** or
        application/x-x509-ca-cert der
        * Then you can STOP here, if not, then do the following:
        vi /opt/zimbra/httpd/conf/mime.types
        * And then at the end of the file, or in alphabetical order (since the list in the file is in alphabetical order),
        * add the following line:
        application/x-x509-ca-cert der crt
        * If you had to add the line to mime.types , you'll need to restart zimbra at some point before you can continue
        * with the tests below.
        * To test, in a web browser:
        * You should be prompted about accepting cert, you can cancel out of this.
        * To Transfer Zimbra server CA to your mobile device:
        * On the mobile device, browse to
        ** (you should be prompted to install the CA certificate)
        * Ensure you check both check-boxes for the trust settings for Internet and Online Certificate Check

Special Note About Android Phone's

Special Note About Nokia's

From Nokia's Website :

  • Supported devices:
    • Nokia devices with ActiveSync built into the email client:
      • Nokia E75, Nokia E72, Nokia E55, Nokia E52, Nokia N86 8MP, Nokia 6710 Navigator and Nokia 6730 classic
  • Nokia devices with Mail for Exchange email client:
    • Certified devices:
      • Nokia Eseries: Nokia E51, Nokia E63, Nokia E66, Nokia E71, Nokia E90
      • Nokia Nseries: Nokia N76, Nokia N81, Nokia N81 8GB, Nokia N82, Nokia N95, Nokia N95 8GB
      • Other Nokia S60 3rd Edition devices: Nokia 6120
    • Enabled devices:
      • Nokia 5700 Xpress Music, Nokia 6110 Navigator, Nokia 6121, Nokia 6210 Classic, Nokia 6290
    • Certified devices are devices on which the functionality of the Mail for Exchange software client has been validated.
    • Enabled devices are devices on which the functionality of the Mail for Exchange software client has not been validated individually, but where the functionality of the Mail for Exchange software client on a certified device has been validated in the same software branch.

Some Issues Addressed On Nokia'S Support Forum:

Mobiles And GAL Searches

Some RFE's to watch:

Bugs To Be Aware Of

Zimbra Mobile And ActiveSync Technology

Zimbra Mobile on Windows Mobile Smartphones, Nokia Business Series Smartphones, Apple iPhones, Palm Treo or any other Smartphones that natively uses the ActiveSync Technology

Understanding how Direct Push works:

Understanding Direct Push, From MS Exchange Server 2010 Help

Make sure you review the other pages for this subject that will show on the left hand side.

Windows Mobile Emulator For Testing

You can use the following to setup a Window Mobile emulator for testing.

iPhone General Topics

iPhone And Caldav

See Ajcody-Apple-Mac-Issues#iTunes_.26_iPhone_configuration_for_CALDAV

iPhone And SSL Certs

Send CRT File To iPhone By Email

For a self-signed certificate file on the ZCS server, path is /opt/zimbra/ssl/zimbra/server/server.crt

If you email yourself the crt file and read the message from the iTouch/iPhone device, you'll get a "install" button to push.

Setup Webserver To Server Out CRT

For a self-signed certificate file on the ZCS server, path is /opt/zimbra/ssl/zimbra/server/server.crt

Please see the following:

iPhone 2 Topics

iPhone 2 Support & Features With Zimbra

Here's three nice references to review:

iPhone 2 Bugs

BES Connector Issues

Bugs & RFE's

Import Ones To Note First

  • "ZCB PDF needs to include information on server sizing and ZDBs"
  • "BB: ZCB/BES Sizing Data Needed"
    • http://bugzilla.zimbra.com/show_bug.cgi?id=22415
      • Recommended Maximum Number Of Users Per BES Server - 50
        • The recommended max is 50 users. After recommended max. is reached you may receive error message in BES MAGT log file indicating that user was not added successfully.
  • "BES/ZCB doc's for restore and server move's"
  • "BES and Proxy" [GunsNRoses]
    • http://bugzilla.zimbra.com/show_bug.cgi?id=33179
      • Description: Per the ZCB documentation, the BES server needs to talk to a single Zimbra mailbox server over 443 and 7071. The problem is that the mailbox servers are behind the Zimbra Proxy and are running in reverse-proxy mode - meaning, they only serve over basic http (port 80) and NOT over 443. The proxy servers serve over 443 - but do not do the 7071. So, we can't point the BES server at a Zimbra mailbox server because the Zimbra mailbox server is not listening over 443 due to being accessed through the proxy. We can't point the BES at a Zimbra proxy server because they do not handle 7071.
BES With Multiple Domains

For the BES Admin account to see users from all your email domains [domains the BES admin isn't a part of] you'll need to set the GAL variables to ROOT. Please review the bug/rfe's above though, as you might not want to do this because of its impact.

To see your current settings:

 zmprov gd <domainname besadmin is in> zimbraGalInternalSearchBase
 zmprov gd <domainname besadmin is in> zimbraGalSyncInternalSearchBase
 zmprov gacf zimbraGalInternalSearchBase

To change your settings (for example, to use ROOT):

 zmprov md <domainname besadmin is in> zimbraGalInternalSearchBase ROOT
 zmprov md <domainname besadmin is in> zimbraGalSyncInternalSearchBase ROOT

Status Of Unconfirmed, New, Assigned, Reopened As Of April 27, 2009

Release Target Version Was Based Upon April 27, 2009. Please goto bug/rfe link for status changes.

BES Wiki Pages

See Wiki Category ZCB.

Split-DNS Issue

If your running split-dns for zimbra, make sure your BES box is configured to use the right DNS servers because it will pull the zmhostname variable and you don't want it resolving to the external ip address.

Duplicate Calendars

One customer reported that "updating the firmware to (as I'm at now) fixed the issue with the duplicate calendar".

Upgrade Steps For ZCB

The Bascis

The normal upgrade process is to

From Beta2 To BES SMB - Outlook 2003 To Outlook 2007 Requirement

Here is the list of steps on how to upgrade from BETA2 to BES SMB:

  • Stop BB controller [ see Correct_order_to_stop_and_start_BES_services ]
  • Completely remove Outlook 2003
    • (First, go to Add/Remove programs and uninstall Office 2003. And then run the following utility to cleanup stuff left behind. The utility is called ‘Office Removal Wizard’ and located in the \FILES\PFILES\MSOFFICE\OFFICE11 folder on the install CD. OFFCLN.EXE)
  • Install Outlook 2007
  • Open BES SMB msi to start installation wizard. Accept license agreement and continue following the steps in installation wizard
  • Start BB controller [ see Correct_order_to_stop_and_start_BES_services ]
Jump to: navigation, search