Ajcody-Migration-Notes

Revision as of 22:21, 18 August 2008 by Ajcody (talk | contribs) (Working Possibility But Untested/QA'd NOT FINISHED - DON'T USE)

Migration Issues

Actual Migration Notes Homepage

Please see Ajcody-Migration-Notes

Server Migrations

Staged means that the migration will take place in steps over time where users mailboxes will be moved to a different server. This process might involve a Split-Domain configuration or the use of LDAP replica's that would intergrate a new ZCS mailstore.

RFE/Bug's For Migration Tools

I'll try to keep track of items here when I find them.

Staged Migration of Non-Zimbra or ZCS Server to New ZCS Server

Review the following articles:

Staged Migration Of Complete Zimbra Server To New Zimbra Server

If your moving users to a new mailstore, please see King0770-Notes#Preferred_Method_Moving_Users_To_New_Machine for a possible solution. This process implements a new LDAP replica's with the new ZCS mailstore. Over time you migrate the account to new ZCS with zmmailboxmove. Once the accounts have all been moved, you prompt the LDAP Replica configuration on the new ZCS server to be the LDAP master. Adjust for the MTA configuration and then retire the old box.

The rsync method, described in Ajcody-Notes#Server_Move_To_Same_Platform_64bit_And_OS_Type_Version would require downtime.

Staged Migration of Zimbra Server Domains To Zimbra Server With Existing Domains

First Thoughts

The process would involve migrating the LDAP data for the domain from the old zimbra server into the other existing Zimbra system (using slapcat or ldapsearch). You'll need to get the server entries, any customer COS entries, the domain entry, and all users under that domain. You would then load the information (ldif) into the existing Zimbra server with slapadd. You could then reconfigured the old server to become an ldap slave to the existing Zimbra box and to server simply as a mailstore for that domain data (users). One could also proceed with zmmailboxmove if you needed to migrate the user data onto the other box as well now.

Adjustments would also need to be done in regards to auth keys and server certs.

Second Possibility Untested or QA'd - NOT FINISHED - DON'T USE
Situation

Let's say you own a hosting company and a new customer says they are running Zimbra Network edition (same version as yours) and wants you to host them. They only have one domain and want to minimize downtime. Their server is in another country or state. They have 50 users.

Realistically, during the migration time frame, those accounts that will be using the temporary sub-domain until the switch is complete should only use the zimbra web client. Phones, thick clients, and so forth will introduce issues about synchronization and so forth that would be better to simply avoid.

Split-Domain Setup

Setup a split domain that you can use through the migration time frame.

They are company.com

You'll be migrate.company.com

See Ajcody-Notes#Staged_Migration_of_Non-Zimbra_or_ZCS_Server_to_New_ZCS_Server about Split-Domains and Domain Masquerading. Other adjustments might need to be applied.

The situation will be this:

  • All emails maintain their company.com domain and email comes and goes through customers ZCS server.
  • Customers ZCS will be using forward/alias for account to goto @migrate.company.com
    • User Forward/Alias
      • Need to figure out the right way to do this for this situation still.
    • Relaying/Domain Forwarding
      • zmprov
      • md example.com zimbraMailCatchAllAddress @migrate.company.com
      • md example.com zimbraMailCatchAllForwardingAddress @migrate.company.com
      • md example.com zimbraMailTransport smtp:mta.HOSTING-COMPANY.com
  • Accounts migrated to Hosting company server will have rewrite rules. So migrated accounts will not be exposed to "outside" world.
    • zmprov md migrate.company.com zimbraMailCatchAllAddress @migrate.company.com zimbraMailCatchAllCanonicalAddress @company.com
    • Need instructions to configure for this particular domain mta rules do basically do the below WITHOUT effecting the other domains with the hosting companies ZCS infrastructure.
      • $ zmprov mcf zimbraMtaRelayHost mta.COMPANY.com
      • $ zmprov mcf zimbraMtaDnsLookupsEnabled FALSE
Break Up User Migration

Determine group of users that make sense to migrate based upon their functions and mailbox sizes. Some items might not work 100% as expect while in transition - i.e. Calendars, Resources, Wiki, etc..

Set Accounts To Maintenance

Set the targeted accounts to Maintenance status. They should stay this way after the backup is completed and will stay like that until the migration to the new server is complete and the split-domain is setup.

Backup

On the customers ZCS server, do a backup of the selected users. Be careful of where you direct the backup to and that you'll have space.

mkdir /tmp/backup-accounts
zmbackup -f -a userA@company.com userB@company.com userC@company.com -t /tmp/backup-accounts
Problem With Backup

Ideally, we would then do something like this:

zmbackup -i -a userA@company.com userB@company.com userC@company.com -t /tmp/backup-accounts

But this will fail, with:

Error occurred: system failure: Customer backup target is not allowed for incremental backup

And if you don't use the customer target it seems like the incremental picks up all the accounts. The point of wanting this would be to send a full via mail if needed and to allow the incrementals to be small enough to transfer over the network between the customer site and the hosting company.

Set Company Domain Onto Hosting Server

You'll need to setup the companies domain on your server before the zmrestore will work. You might as well configure the COS to make what the customer is using.

If your using a non-default COS.

  • zmprov cc companyCOS
    • adjust in web admin console if needed
  • zmprov gc companyCOS | grep zimbraId
    • zimbraId: 420447db-ea43-4d92-b62d-0164767f516d
  • zmprov cd company.com
    • adjust in web admin console if needed
    • zmprov md company.com zimbraDomainDefaultCOSId 420447db-ea43-4d92-b62d-0164767f516d

Set this domain to Maintenance mode.

Restore Account Onto Hosting Server
zmrestore -a userA@company.com userB@company.com userC@company.com -t /tmp/backup-accounts
Move Restored Accounts Into Split-Domain

If split domain is already setup:

zmprov ra userA@company.com userA@migrate.company.com

If not, your could do a domainrename:

zmprov -l rd company.com migrate.company.com
Forward Accounts That Were Moved

On the customers server, you'll now setup those accounts to forward to the split-domain.

Email for userA@company.com forwards to userA@migrate.company.com

Here's another problem though. We need to find a way to switch to a forward/alias on the companies ZCS so that emails don't get bounced with "no such account". You can't setup an alias as long as the account exists on the box.

Some Zimbra Users From DomainA to DomainB On Same Zimbra Server

All Accounts From DomainA to DomainB

You would use [renameDomain]:

zmprov -l rd domainA.com domainB.com

Please review domainrename though, there's some outstanding issues with this depending on your ZCS version.

Account From DomainA to DomainB

You want to use [renameAccount]:

zmprov ra userA@domainA.com userA@domainB.com

This is same command to rename account within the same domain:

zmprov ra userA@domainA.com userB@domainA.com


Non-Zimbra IMAP Accounts To Zimbra

IMAPSYNC with admin login

Reference - http://wiki.zimbra.com/index.php?title=User_Migration

imapsync --buffersize 8192000 --nosyncacls --subscribe --syncinternaldates \
--host1 server1.test.org --user1 yourAccount --password1 yourPassword \
--host2 zimbra.test.org --user2 yourZimbraAccount --authuser2 admin \
--password2 adminZimbraPassword --authmech2 LOGIN

You can also try --authmech2 PLAIN

I found this description in one of the imapsync files:

"You may authenticate as one user (typically an admin user), but be authorized as someone else, which means you don't need to know every user's personal password. Specify --authuser1 "adminuser" to enable this on host1. In this case, --authmech1 PLAIN will be used, but otherwise, --authmech1 CRAM-MD5 is the default. Same behavior with the --authuser2 option."

Performance Issues With IMAPSYNC
Jump to: navigation, search